Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

whats it called and does any one have one???

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Red_Zook
Banned
Posts: 2041
Joined: Mon Jan 24, 2005 7:41 pm

whats it called and does any one have one???

Post by Red_Zook »

i have lost a bit from my clutch cable...

there is like a bit of 8mm round bar 15mm ish long with a hole though the center that the cable go's though...
then there is a special nut on the other side.....
well i have lost the dam bit of round bar... and i am 2 lazy to make one!!
whats it calleed? and does any one have a spair one?
Top
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

It's called a dooverlacky and no I do not have a spare one :finger:
Maybe you should try the thingyamajig shop the stock a lot of esoteric whatsitcalleds
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

I made one out of a bit of solid I had lying around. It was extremely difficult. I had to cut it to length then drill a hole through it. Took me most of the day. :D

Actually I still have it as I found the other one. if you really cant be bothered and dont mind waiting a few days I'll send it to you.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

come to my suzuki parts department, i have one in stock, not a cheap item them....i will swap you for what i wanted, rotor? :cool:
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Suzuki part #09150-06014 Nut.
Top
Red_Zook
Banned
Posts: 2041
Joined: Mon Jan 24, 2005 7:41 pm

Post by Red_Zook »

ZookStock wrote:go to a bike shop and buy one off them....... cheap and effective...
I nearly took bite to the heading and posted a tassie joke :D
good idea!!!!

i will do that...
brenno u can have a caliper u just have to go get it
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests