Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

V5MT1 gearbox removal

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 249
Joined: Tue Nov 02, 2004 4:16 pm
Location: Melbourne, Australia

V5MT1 gearbox removal

Post by Sammyboy »

Hey guys, I drive a 1990 NG Pajero with an intercooled 4D56. It has been a really good car since it replaced my old NA back in February. This weekend I will be replacing the clutch (which has been playing up, especially since I went 4WDing a few weeks back), and to do that I will be removing the gearbox. I don't intend to take the gearbox apart, but what do I need to look out for to make sure it's in good condition? How do I know if I need to do something more to the gearbox before I re-fit it. I know that mitsubishi has had a bad reputation with it's earlier gearboxes, and I would apprieciate any advice possible. So far, my gearbox has performed really well and I hope that it stays that way! Thanks for your time...
1990 NG Paj TDI: 2.5 exhaust, 146l Longranger tank, snorkel, 2" suspension lift, 31" Bighorns.

1985 Holden Drover: 2" OME suspension & shocks, extractors, 2" exhaust, 235/75 MTR's
Top
Posts: 11
Joined: Mon Nov 12, 2007 9:09 pm
Location: warragul

Post by rustygq »

mate it wouldnt hurt to put a set of new bearings through it but if its been driving well and doesnt whir pretty much dont fix it if it aint broke. reco box for those things are only about 1500 or so. drive her till she pops and bang another in
rustygq
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest