G'day can someone please tell me how to adjust the camber of my RA rodeo. I've recently lifted it 2 inches using efs shocks and springs and had pretty bad negative camber.
So I flipped the balljoints and now I have positive camber not as bad an angle but still looks silly \ --- / so yeah if anyone can point me in the right direction as to how to adjust it I will be very happy.
Thanks in advance.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
camber adjustment help please!!
Moderator: Moderators
If the setup is the same as the previous models, the camber is set by adding or removeing shims from the upper control arm where it bolts to the chassis. Shims go between the chassis and upper control arm mount.
As mentioned above take it for a wheel alignment, they should be able to sort it out.
As mentioned above take it for a wheel alignment, they should be able to sort it out.
Reliability lies in the state of your wallet.........
Enjoy your family,friends and kids,remember no one gets out alive.
Enjoy your family,friends and kids,remember no one gets out alive.
Who is online
Users browsing this forum: No registered users and 0 guests