Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

BBM Rick's Rover thing. NOW FOR SALE OR SWAP!

Tech Talk for Rover owners.

Moderator: Micka

Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

Aquarangie wrote:
GURU wrote:my 2 cents worth.

First Rick congrats on getting a rangie and developing a 4" lift kit to sell in the future, It has been need for a very long time, well overdue. 2ndly, congrats on not wanting to put a body lift in, I'm against them and would take a 4" suspension lift anyday.

PM sent....
Just a question, why do you have a beef with body lifts? Not having a crack at you, just curious that's all.

Trav
BBM Rick wrote:Cos I prefer to have the clearance under the chassis rails, my local track has lots of spots to drag your belly and I dont want to be doing that if I can help it.
I understand your point, just in this case my preference is not just to fit bigger rubber, but get max clearance under the rails and running gear.

Rick.
Page 1 :D
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 683
Joined: Thu Mar 06, 2003 3:42 am
Location: Sydney

Post by GURU »

as above is one reason, and becasue they crack mounts. Rangies may get away with it (no one has mention this as a problem) but most cars eventually crack mounts or the floor pan gets a bend/ knock in it.

The other reason is why BL if you don't have to. I would prefer to run a 2" lift and just cut the guards to clear tyres, keeps the CG lower too.

At the end of the day it's only my view, I know you aren't having ago.
[i]DAS[/i]
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
Posts: 128
Joined: Sat Jun 30, 2007 7:48 pm
Location: MINCHINBURY

Post by ROVERNIT »

hay Rick give some pic on the ramp after the suspension set up bloody hell its better then mine yours in standard :oops:
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

ROVERNIT wrote:hay Rick give some pic on the ramp after the suspension set up bloody hell its better then mine yours in standard :oops:
No major improvement in travel, but plenty more room for bigger tyres. Getting the big flares fitted this week, then gotta decide what tyres to run. Knowing me, I will change my mind 4 or 5 times between now and then anyway.
I will post up some pics of the tyre choices I have narrowed down and get peoples thoughts.
rick@offroadmediagroup.com.au
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

Image
Pro Comp Xtreme All Terrains. Would be good for road work and are more aggro than the pic shows.


Image
MTZ's. Good on road, good offroad, but everyone has got em now.


Image
Something a bit different, and the direction I am most likely heading at the moment.
Will be going with a 35 at this stage also.
Any other suggestions? The criteria is

Must be good onroad, so no bias belted tyres.
Must wear OK.
Gotta look tuff!
Not outrageously loud.

:armsup:
rick@offroadmediagroup.com.au
Posts: 128
Joined: Sat Jun 30, 2007 7:48 pm
Location: MINCHINBURY

Post by ROVERNIT »

what kind of flares did you end up with
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

LRA XL (for 35+) Flares. What a mission they will be to fit!!
rick@offroadmediagroup.com.au
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

BBM Rick wrote:

Image
Something a bit different, and the direction I am most likely heading at the moment.
Will be going with a 35 at this stage also.
Any other suggestions? The criteria is

Must be good onroad, so no bias belted tyres.
Must wear OK.
Gotta look tuff!
Not outrageously loud.

:armsup:
what are they worth?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
User avatar
DK
Posts: 527
Joined: Fri Oct 20, 2006 6:00 pm
Location: Melbourne

Post by DK »

From the tyres you have shown i like the MTZ's a few mates run them(not on rovers)but they perform really well.

IMO(for what its worth) a 10.5" width tyre is plenty wide enough for a Rangie but that narrows your choice drastically.

The other thing i guess that needs consideration is you guys drive different terrain to us Mexicans.
3dr 110 H/Top,Swampers,Locked and Loaded
DL
Posts: 299
Joined: Wed May 31, 2006 8:33 pm
Location: Bellarine, Brackistan

Post by DL »

Gotta have a laugh.

Those Dick Cepek tyres are so scientifically designed. Skull and crossbones on the side biters and similar representation of the ends of thigh bones in the lugs. Boggers gone through an ad agency.

The others look ok though.

DL
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

New Bar Treads :armsup:
Land Rover Discovery - GQ conversion underway
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

Got my flares done today. The instructions are quite possibly the least useful I have ever come across for such a big job! These are the ones to fit 35in+ tyres.


Image



Image



Image



Image



Image



Coming next are 60 series diffs, built up and ready to rock! Stay tuned kids!
rick@offroadmediagroup.com.au
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

Sorry for the big pics, I will go resize them sometime over the weekend. :oops:
rick@offroadmediagroup.com.au
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Re: What have i done?

Post by ... rick »

Maggot4x4 wrote:
BBM Rick wrote:I did it. I bought a Rangie. Everyone here is laughing at me. I probably deserve it too, I know jack about em. Its a 92 RR "Sherwood" limited edition. 3.9 & 4spd auto. Absolutely standard. Now, where did I put that grinder.....
You can't cut up a Sherwood. :D

Yes I can!! :D
rick@offroadmediagroup.com.au
Posts: 128
Joined: Sat Jun 30, 2007 7:48 pm
Location: MINCHINBURY

Post by ROVERNIT »

and he did :lol: :lol:
Posts: 395
Joined: Thu Nov 06, 2003 4:36 pm
Location: cowtown W.A.

Post by jbell »

You dont need 60 series diffs... Just get some rover
longfields, Q78x16 on those rims with wheel spacers,
would be strong & look sweet.........

Jeff
rover money pit on mogs !!!
Posts: 128
Joined: Sat Jun 30, 2007 7:48 pm
Location: MINCHINBURY

Post by ROVERNIT »

I thought 60 series diffs whould have been weaker then 24 spline diff of has rick got the 12 spline axles
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

jbell wrote:You dont need 60 series diffs... Just get some rover
longfields, Q78x16 on those rims with wheel spacers,
would be strong & look sweet.........

Jeff
But then I would still be stuck with crap gearing and no lockers. The new diffs option solves a heap of issues for only a few hundred $$'s more than a set of Longs.
rick@offroadmediagroup.com.au
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

ROVERNIT wrote:I thought 60 series diffs whould have been weaker then 24 spline diff of has rick got the 10 spline axles
And your kidding right, the 60 stuff shits all over anything that came from the Rover factory :rofl:
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 128
Joined: Sat Jun 30, 2007 7:48 pm
Location: MINCHINBURY

Post by ROVERNIT »

I wouldnt know never looked into 60 series diff

I can say I've seen a guy go through three axelss in one day out at Meni thats about it

Oh yeah 10 sorry

But I do see ricks piont these diffs have got the lot and already converted
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Post by Slunnie »

The 60's will be sweet, especially with Longs. :D

I'm not sure how hard they are to fit to a RRC, but they're a piece of cake for Series Landys.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Posts: 128
Joined: Sat Jun 30, 2007 7:48 pm
Location: MINCHINBURY

Post by ROVERNIT »

Slunnie wrote:The 60's will be sweet, especially with Longs. :D

I'm not sure how hard they are to fit to a RRC, but they're a piece of cake for Series Landys.
well there already converted out of RR so that the least of his probs I think. it has gear, locked up and tough CV you beut
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

Rick, colour code those flares - they will look HEAPS better
Warn - Dont leave home without it
Posts: 128
Joined: Sat Jun 30, 2007 7:48 pm
Location: MINCHINBURY

Post by ROVERNIT »

Agree to the front bar while your at it
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

disagree. colour coding is for fab five.
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

AnthonyP wrote:disagree. colour coding is for fab five.
So yours are done then? :D
rick@offroadmediagroup.com.au
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

TRobbo wrote:Rick, colour code those flares - they will look HEAPS better
We were discussing it, do you have any pics or examples to show?
rick@offroadmediagroup.com.au
Posts: 683
Joined: Thu Mar 06, 2003 3:42 am
Location: Sydney

Post by GURU »

you should go 80 series front and nissan rear, cause they are wider, more stable

had nissans in my old one, was awsume. But by the soulds of it you are getting 60's setup for a RR with lockers and gears....if thats the case you can always get offset rims, or spacers if you get desprete.

as for colour coding, just get some black rims (steel or alloy) will set it off nicely with black flares and barwork
[i]DAS[/i]
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
Posts: 44
Joined: Tue Jan 25, 2005 5:26 pm
Location: Healesville

Post by 360rangie »

are you sure you dont mean 8o series rear and nissan front? I always thought nissan rear had the wrong centre offset, (BAD VIBES)
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

OK, a bit of an update on my Rangie. Starting to come together now, got the Toyota diffs in, and got a set of 17x9 Mickey T Classic Locks with 35x12.5r17 MTZ's.
Still heaps to do, including getting the shakes, noices, vibes, clangs and bangs out of it. I am determined that it will drive exactly like it did the day I picked it up by the time Im done.
So far I have had tailshafts modded, a draglink made, and braided brakelines made up as well.
Here are the first couple of pics.


Image


Image

Will see if I have any decent pics of the install, which I doubt, as we were full speed ahead the whole time! Did the job in around 8 hrs!!
rick@offroadmediagroup.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests