Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Zook run this sat - Perth

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Zook run this sat - Perth

Post by nicbeer »

Chucked it in here, coz easily lost or not looked at. :)

Zook Run meeting Place and time:

Meet: Coles carpark Gosnells Albany Hwy, Gosnells
Date: Saturday December 1st
Time: 7am for 7:30 departure

Drive time: Harvey is about 90 minutes south from Armadale (i think)

What to Bring: Recovery gear & something to eat and drink. camera for a group photo. Camping gear if you wanna stay overnight.

Terrain: something for everyone. While we expect to find some challenging tracks that may cause vehicular damage, you are free to choose the chicken runs.

Car Limit: NO LIMIT. If you got a Zooki.... you can come, other cars welcome as well. just turn up on Saturday.But wanna see as many Zooks as possible !!

Disclaimer:
"Perth4x4 and myself accept no liability for any loss, damage or injury to persons or property arising from attending this trip. While all due care will be taken, no responsibility will be granted. If you act unappropriately whilst on the trip, you will be asked to leave"
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

perth4x4? nic.... how could you stoop that low? lol - sorry i just see a lot of posers with the stickers on their windows and it upsets me.

and DAM YOU for arranging a trip before my zuk is done... lol
The worst thing about censorship is ███████.
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

ill be there :twisted:
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

yeh perth 4x4.

i didnt organise it but there are some good zooks there. but on the other hand suzuki club of wa is invited :roll:
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

in that case ill bring my mazda 323.... should keep up with them easily =P
The worst thing about censorship is ███████.
Posts: 87
Joined: Fri Nov 22, 2002 1:16 pm
Location: Perth, WA

Post by karmic »

alien wrote:and DAM YOU for arranging a trip before my zuk is done... lol
haha! Are you still waiting for the arm to be made up correctly?? What is it now, 2 years or something??

Kyle
.: http://www.suzukiinfo.com :.
Posts: 1
Joined: Sat Dec 01, 2007 9:22 am
Location: Eaton, WA

re

Post by Matt-zook »

hay, i think i'll have to bring my zook next time, i might not be in perth but i live 30 mins from harvey :twisted: i'm out there most weekends anyway i'd just go for a play today but i'm off further down south,

i live in Eaton, i look at these forums a fair bit, best info around i think,
my zook has all the gear, spring over, body lift, gears, dropshackles, all good fun

welcome to drop me a email next time , just might have some new spots for ya

Matt-zook
Matt86@westnet.com.au
Posts: 38
Joined: Fri May 20, 2005 12:57 am
Location: perth

perth4x4

Post by tuls »

alien get your head out of your ass if you don't like them who gives a shit but don't go off about people you don't know anything about . sooner or later your going to need those posers with their stickers to get you out of the shit. so remember its just not about you ,
Posts: 118
Joined: Tue Mar 14, 2006 11:16 am
Location: esp wa

Post by tazzazuk »

any pics or vid of the day?
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

kyle - i hate you! hehehe - im actually waiting on a refund for $$$ payed to that supplier. Suzistore (suziwest) have a 1 piece milled arm in production - of which ill be testing the prototype =) Turns out "that other vendor's" arm would not have passed engineering too! (even though i was assured it would).

tuls, - calm down bro, its just harmless banter - i went fishing and you bit - hard =) haha
The worst thing about censorship is ███████.
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

alien wrote:kyle - i hate you! hehehe - im actually waiting on a refund for $$$ payed to that supplier. Suzistore (suziwest) have a 1 piece milled arm in production - of which ill be testing the prototype =) Turns out "that other vendor's" arm would not have passed engineering too! (even though i was assured it would).

tuls, - calm down bro, its just harmless banter - i went fishing and you bit - hard =) haha
engineeres are different east to west, 99% of the stuff in the east wont pass here because the engineeres have no idea here.
buggy time............
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

i broke 3 axles in one go. Awsome driving back to the main road doing 1kph and watching my wheel almost fall off then waiting with 5 million flies attacking me for 2 hours while me old boy got a trailer to pick us up.
other than that it was a good day
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

mrRocky wrote:i broke 3 axles in one go. Awsome driving back to the main road doing 1kph and watching my wheel almost fall off then waiting with 5 million flies attacking me for 2 hours while me old boy got a trailer to pick us up.
other than that it was a good day
3 axles? which ones. i only thought u did the left hand side.

+ did ur old boy have the lada + trailer? as saw one on way home.

Day was great out there. will get some pics up soon.

day started crap with a 3 car prang blocking the whole SW hwy. but very lucky no one hurt and we got away after 1hr ish later.

carnage was
karmic - blown rear axle/diff not too sure.
Me- UHF antenna broke + new dents i think underneath., :)
MrRocky - as above, i thought it was only left cv + rear axle
numerous mild dents + scratches to a few of the vehicles.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

front passenger axle not cv
rear passenger axle
drivers rear axle splines looks like they spun and are rooted slips and has no drive over 10kph and no reverse it just spins
cool huh? :bad-words:
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

sounds like a great day - looking forward to pics!

looks like Kyle is gonna go join the CIG locker club too eh? =P
The worst thing about censorship is ███████.
Posts: 87
Joined: Fri Nov 22, 2002 1:16 pm
Location: Perth, WA

Post by karmic »

alien wrote:looks like Kyle is gonna go join the CIG locker club too eh? =P
What do you mean join?? I got my rear welded almost 2 years ago by your mate in greenwood... and I broke it after about 6 months :P so I've been open diff again for a while now :P

but yeah it was a good day! Should be a vid soon I think. I took some phone footage but its pretty below average :P

Bling, I mean MrRocky, had a good shot up a boulder but as mentioned broke more than I did :P

Kyle
.: http://www.suzukiinfo.com :.
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

since people asked :)

can be moved to tracks if interested (mods)

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

pics.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

great pics nic! looks like some awesome fun!
The worst thing about censorship is ███████.
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

geez mick ya mean to say u broke 3 axles on that pissy little hill?? :finger: , if i remember rightly there is a hill of that track to ur right that goes up hill and has sum good rocks and ruts, thats the 1 u should of driven :armsup:
buggy time............
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Post by Kitika »

Those pics are awesome to bad harvey's a fair trek away...
One question is this shackle reversal on this rig? Wouldnt mind a not so blurry close up of the set up :lol:
Image[/quote]
More Suzuki parts going to the big Suzuki Heaven in the sky!
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Yep it is.

he is getting rid of the kit as far as i know also. doesn't like it.

Nic
Last edited by nicbeer on Thu Dec 06, 2007 2:34 am, edited 1 time in total.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 286
Joined: Fri Jul 23, 2004 11:47 pm
Location: ex perth now south of brissy

Post by Drew »

nice pics nic
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

snap, crackle, pop is never a good sound coming from your car
driving style and approach speed may have played a small part in
the end result
Posts: 242
Joined: Fri Nov 17, 2006 10:27 am
Location: Perth, WA

Post by croatian4x4 »

mrRocky wrote:snap, crackle, pop is never a good sound coming from your car
driving style and approach speed may have played a small part in
the end result
lol I was at the bottom of the hill and I could hear your wallet crying from there! :P
Post Reply

Who is online

Users browsing this forum: No registered users and 49 guests