so I am putting a TH400 on my 6.2l chev oiler in the 73, the flywheel that came with the gearbox and adapter is to small, needs to be a larger diameter 3 bolt flywheel to suit the torque converter
Can anyone tell me what diameter / tooth count flywheel I need P/N would be nice and best place to source one
Thanks
Adam
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
what flywheel
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Road Ranger
what flywheel
If the above post did not offend you in any way please PM me so I can try harder!!
Road Ranger
no probs, there is 5 or 6 have to check that one and the torque converter is a 3 bolt unit, np getting something drilled if needs be....does anyone know of a yank truck with the 6.2 with t t400??VKYOOT wrote:1, u need a flexplate, flywheels r for manuals. (not bein a smart norti werd just lettin ya know).
chances are ur lookin at havin to source a chev one n gettin it drilled to suit the t400, could be wrong.
how many bolt holes in the flange on the crank?
If the above post did not offend you in any way please PM me so I can try harder!!
Road Ranger
So it seems that after a chat with bruswick diesel that the 3 bolt converter is not the correct item, I am trying to arrange an exchange for the 3 bolt to a 6 bolt converter now.
The crank flange is 6 bolt, flex plate should be 182 teeth IIRC and you need a 6 bolt torque converter, this flywheel is available from brunswick for $175
me thinks I am going to do a bit of a write up on the pitfalls of this conversion when I get it done
The crank flange is 6 bolt, flex plate should be 182 teeth IIRC and you need a 6 bolt torque converter, this flywheel is available from brunswick for $175
me thinks I am going to do a bit of a write up on the pitfalls of this conversion when I get it done
If the above post did not offend you in any way please PM me so I can try harder!!
Who is online
Users browsing this forum: No registered users and 7 guests