Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Rear Diff hot brake

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 49
Joined: Wed Oct 25, 2006 10:57 pm
Location: Melbourne, east suburbs

GQ Rear Diff hot brake

Post by workmonday »

While in the bush today I lost feel in the brake pedal and had to give it a few pumps to get em back. I found the rear left smokin, the wheel, caliper etc was steaming. I pulled the caliper and disc off and found bugger all. Could it be the axle bearing or is it just the brake dragging? Any ideas?, cheers
Top
Posts: 890
Joined: Sun Jul 29, 2007 4:31 pm
Location: Found

Post by Froon »

You make a trip through water at all prior to the steam incident? If so thats probably the cause of the steam...

But sounds like it may be a bearing... jack it up and give it a shake does the wheel move? If so thats def a bearing.

Check all four corners too, just because it was steaming does not make it the cause of the soft pedal...
[quote="fool_injected"]
For once I don't have a smart arse retort, usally I\m pretty handy :lol:[/quote]
Top
Posts: 49
Joined: Wed Oct 25, 2006 10:57 pm
Location: Melbourne, east suburbs

hot diff

Post by workmonday »

I should have said it was smokin, not steaming. I think you may be right with the bearing idea. I havent done one of them before, hope its nnot a prick., cheers
Top
User avatar
JWB
Posts: 451
Joined: Sun Aug 24, 2003 5:48 pm
Location: Logan

Re: hot diff

Post by JWB »

workmonday wrote:I should have said it was smokin, not steaming. I think you may be right with the bearing idea. I havent done one of them before, hope its nnot a prick., cheers
sorry to say, but they are pricks and expensive ones at that!
JB
Top
Posts: 890
Joined: Sun Jul 29, 2007 4:31 pm
Location: Found

Post by Froon »

Just take it slowly, research the tools you need first... With the right tools the job isn't too bad.
[quote="fool_injected"]
For once I don't have a smart arse retort, usally I\m pretty handy :lol:[/quote]
Top
Posts: 111
Joined: Mon Aug 13, 2007 10:04 pm
Location: Perth

Post by madrolla68 »

Make sure its not just sticky slides on the calipers ,they DO give trouble.

Could be simple!!!!!
Top
Posts: 49
Joined: Wed Oct 25, 2006 10:57 pm
Location: Melbourne, east suburbs

Sticky slides

Post by workmonday »

Yes it turned out to be sticky slides, there was a grove worn around one edge of the slide, sanded it out and rotated 180 degrees and no more sticking. Thanks for your help fellas.
GQ 4.2 turbo diesel wagon, lots of good bits..
Top
Posts: 111
Joined: Mon Aug 13, 2007 10:04 pm
Location: Perth

Post by madrolla68 »

Good work simple and cheap fix,just keep an eye on them especially if your doing mud/water/beach work.

Matt
Top
Posts: 59
Joined: Sat Nov 11, 2006 9:17 am
Location: Melbourne, Victoria

Contact:
Contact dassaw

Post by dassaw »

Simple fix, buy a landrover! :finger:

no brake problems with mine!
'97 300tdi Discovery, Fr & R Air lockers
35" Silverstones
www.blackrangeoffroad.com.au
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 10 guests