Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tps wiring diagram holden nissan

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 1
Joined: Mon Dec 03, 2007 11:30 am
Location: melbourne

tps wiring diagram holden nissan

Post by manni »

just fitted 5ltr to gq used nissan auto can someone please tell me where to tap into tps holden 5ltr to nissan auto ,thanxs
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

i don't believe you can you have to mount the nissan tps on to the motor i think when i did it the resistance of the holdens tps is different to the nissan one
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

The origional center wire from the TPS loom Nissan, the loose connector not the one on the TPS, is the Nissan reference.
You can hook into the TPS ref voltage (blue wire I think) its the one that varies from about .7 to 4.5 v as you open the throttle, at the throttle sensor. You won't have an idle switch though so the overrun clutch wont engage on decel so it will feel a bit like it drops out of gear at some speeds on very light throttle.

Cheers
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest