Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Extended steering stops (again)

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Extended steering stops (again)

Post by N*A*M »

Sorry to rehash but I need a better solution.

I went with the extended bolt + retaining nut method and they just don't last. I bend them to meet with the axle tube as best I can but as soon as I come off a rock, the force exerted on the tyre just kills the steering stop.

Carnage pic attached. (Digi cam is busted so I scanned the bolts in my flatbed scanner :roll: ) Two sets here, the dirty ones ate it at NavTrac. Yes one broke off totally :x Grrr! The shiny set I just put in today and they've been in for about 2 hours. :x

There's gotta be another way that lasts longer than just 10mins. Does anyone have ideas?
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

what if you got some 15mm bright bar and machined the end down and threaded it so it screws into the housing. That would be a heap stronger than a bolt.

i can machine some up for you if you want. How long are they?
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

the original thread is is here: http://www.outerlimits4x4.com/PHP_Modul ... ering+stop

there is a pic of the factory steering stop bolt with measurements. i went with 10mm longer high tensile bolts.

are you talking about machining something like this? i put some rough numbers on there of what i think the measurements should be. this is just my guess - so if you have reasons to make it differently, then i'm all for it. how much would it cost to make me 4 of these?
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

sending you a pm ;)
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

mick

i think 20mm is too small
please make them 30mm diametre

thanks
nam
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

my steering stops work well

JUST DONT TURN SO SHARP :D
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

N*A*M wrote:mick

i think 20mm is too small
please make them 30mm diametre

thanks
nam


no problems
Top
Posts: 511
Joined: Thu Oct 31, 2002 8:59 am
Location: Sydney

Contact:
Contact Liam

Post by Liam »

What are you doing to destroy these???
www.bbmotorsports.com.au
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

N*A*M wrote:i think 20mm is too small
please make them 30mm diametre


with 2 flat spots milled into the sides to take a common sized spanner :idea:
Top
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

NAM what grade bolt are they? get some grade 8 bolts and all should be fine, those ones look like run of the mill cheese bolts, don't go for bunnings high tensile bolts there just too weak.
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 4 guests