anyone done this mod?
do's don'ts?
i have a 4sp box
thanks guys
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
RB30 into mq
If the MQ motor was an L28 it will bolt straight up. If a disel or P40 just source an L28 bellhousing, clutch fork and thrust brg carrier.
The engine will be on a fair lean thats all. I have seen it done, just make up some new engine mounts and drop it in. If your going to run a carby might need to level up the carby. Its and ok conversion, i would say it would be ok in the SWB when your on a tight buget.
Hope this helps
Sterlo
The engine will be on a fair lean thats all. I have seen it done, just make up some new engine mounts and drop it in. If your going to run a carby might need to level up the carby. Its and ok conversion, i would say it would be ok in the SWB when your on a tight buget.
Hope this helps
Sterlo
Who is online
Users browsing this forum: No registered users and 2 guests