I am looking to buy a 1998 range rover (that shape) and want to do the standard things to it.
Lift,
Bullbar,
Exhaust System
Problem is I have only ever seen one done up. Can anyone give me some guideance who the best people to talk to would be and also if any one has any pics of that shape.
Thanks!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1998 Range Rover plus
Moderator: Micka
1998 Range Rover plus
I intend to live forever-so far so good.
Thanls
Thanks mate - I will put it out and see if I can get onto him. I actually saw a 1998 rangie driving through Bayswater - lifted and with a bar. Looked sweet.
Cheers mate
Cheers mate
I intend to live forever-so far so good.
Re: Thanls
Jamie at All Ranges 4wd in London Drive Bayswater built that one.kurmitisgay wrote:Thanks mate - I will put it out and see if I can get onto him. I actually saw a 1998 rangie driving through Bayswater - lifted and with a bar. Looked sweet.
Cheers mate
Coil conversion. Custom Bar. 33's
Give him a call on 03 9762 2600 or PM on here.
:rofl: :popcorn: :snipersmile:
P38 Hardcore Parts
Hey mate,
Try hardrange
In my opinion,i havent seen a better looking adr approved bar which is winch compatible for the p38
Was considering doing one up a year ago,maybe one day.
I reckon go for it! would certainly stand out,just remember the electrics dont like being submerged,so relocate if possible(if you can) http://www.hardrange.com/index.htm
Try hardrange
In my opinion,i havent seen a better looking adr approved bar which is winch compatible for the p38
Was considering doing one up a year ago,maybe one day.
I reckon go for it! would certainly stand out,just remember the electrics dont like being submerged,so relocate if possible(if you can) http://www.hardrange.com/index.htm
Hard Range are the only people who do a bar for the P38 leagaly, as P38s have SRS bags so any bar has to comply to ADRS, so a Body lift kit is out too, they are in QLD. As for the lift, bigger airbags, is the go otherwise its a full on coil conversion, which will include a computer devise to tell the cars computer to drive with out tripping the message bank.
The P38 only has one lever to activate, the Auto box and the hi Low transfer case.
The p38 is 9 inches longer in the wheel base than the previous Rangie, but has a much heavier duty chassis.
The only 2 chances of snorkles is either make your own or try to retro fit the snorkle from the Disco3 as the bonnet goes back to the windscreen, so normal one will get caught when raising the bonnet.
P38s are full on with computers that control every thing including the electric windows.
Mine.
The P38 only has one lever to activate, the Auto box and the hi Low transfer case.
The p38 is 9 inches longer in the wheel base than the previous Rangie, but has a much heavier duty chassis.
The only 2 chances of snorkles is either make your own or try to retro fit the snorkle from the Disco3 as the bonnet goes back to the windscreen, so normal one will get caught when raising the bonnet.
P38s are full on with computers that control every thing including the electric windows.
Mine.
For Kart racing information please visit our site at www.auskart.net
Who is online
Users browsing this forum: No registered users and 3 guests