Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3.8 hilux power steering

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 20
Joined: Fri Jun 29, 2007 1:25 pm
Location: Sydney

3.8 hilux power steering

Post by luxadore »

Hello
does anybody know what length power steering pressure hose is needed when fitting a VP ser2 3.8 into a LN106?

Thanks, jesse
Top
Posts: 108
Joined: Tue Jun 12, 2007 9:46 am
Location: gold coast

power steer

Post by surfseller06 »

I just checked mine and its 600mm in lenght, I got made up at ENZED can't remember how much. I'm about to plumb in a oil cooler on the low pressure side as I have it runs pretty hot when 4wheelin all day( I only run 33's) Mark
96 hilux ex/cab,commadore v6, lokka front, lifted, 4.88's, 33's,duel fuel,trac bar,climax drop pin rear shackles..
Top
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

I think a better way of doing it is to use your existing Hi-press Hilux steel tube to the box and rotate it to go forward and easy bend down beside the box, then at the bottom, a bend so it faces backwards pointing to under the V6 oil filter. To that, get a fitting braized to it to couple to a fitting on the V6 pump flex tube you already should have. No extra pipes are required. I think that's how I did mine and it's still good after 12 years, except the Comm hose perished from the heat, but that was easily replaced.

Pics;
Image
Looking down at back of pump

Image
Looking up from under radiator

Image
Looking down from top of radiator

Image
Looking down from top of radiator
I'm the sharpest tool in the shed!
Top
Posts: 6693
Joined: Mon Feb 09, 2004 10:13 pm
Location: Newcastle

Re: power steer

Post by high n mighty »

surfseller06 wrote:I just checked mine and its 600mm in lenght, I got made up at ENZED can't remember how much. I'm about to plumb in a oil cooler on the low pressure side as I have it runs pretty hot when 4wheelin all day( I only run 33's) Mark
Just flexible stuff with the correct fittings on it?

Same issue for me
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
Top
Posts: 20
Joined: Fri Jun 29, 2007 1:25 pm
Location: Sydney

Post by luxadore »

surfseller06 wrote:
I just checked mine and its 600mm in lenght, I got made up at ENZED can't remember how much. I'm about to plumb in a oil cooler on the low pressure side as I have it runs pretty hot when 4wheelin all day( I only run 33's) Mark


Just flexible stuff with the correct fittings on it?

Same issue for me
thanks thats what i was after
is there a 90 degree fitting on either end or its all just striaght?
Top
Posts: 361
Joined: Sat Mar 06, 2004 11:09 pm
Location: Western Australia

Contact:
Contact toyrex

Post by toyrex »

When I make hoses for commodore series 2 to hilux the hose is about 290 mm long with right angle fittings and nipples in the P/S pump and steering box
Adrian
www.chevtorque.com.au
Top
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

Sounds like luxadore wants some Power Steering Hose BLING.

The longer the better it looks!
I'm the sharpest tool in the shed!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests