Rangie and Disco Diffs (centres)

[crankycruiser]

Can u put a diff center out of a V8 manual 84 rangie into a 94 auto v8 Disco??

Are they the same ratio?? if not wat ratios are they?

I am talking about the rear diff.

Thanks guys

[GRIMACE]

you can but some things will be;
Rangie is only ten spline axles.
One shock mount is rearward.
Course spline pinion.

Its been awhile so I could be mistaken but these things came to mind almost instatly.

I would not bother

unless changed both should be 3.54ratio

[crankycruiser]

sorry mate i should of been a bit clearer, i ment just the centre not the complete housing

[GRIMACE]

sorry mate i should of been a bit clearer, i ment just the centre not the complete housing

ok ratios should be the same, the pinion will have a course spline in the 84 rangie, and the side gear will not accept your disco 24spline axles as they are 10 spline.

If you mean just the bare third member - no carrier and no cwp then I ask WHY?

[crankycruiser]

Im asking for a mate, the rear diff in his disco has died and he has a rangie in the paddock and thought they may be the same..

[bigbad]

if the disco has grease caps on the drive flanges it has 24 spline axles. The 84 RR will have 10 spline. Not sure exactly when the discos changed, I believe it was sometime in 94.