Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hi all,
on my last 4wd trip out to city view, i got hung up on a rock in the creek, resulting me in bending something on my transfer case, i not too sure what is because i dont know too much about them, and now my handbrake dosnt work... it feels much more tighter now and dosnt pull up as far, and it dosnt work at all..... and suggestions? i have got a another 1L transfer case but it dosnt have a handbrake cable and i have no idea on how to put it in??
Remove the rear tailshaft.
Remove the handbrake drum.
Remove the little brake pads and clips etc.
Remove the backing plate that had the little brake shoes attached to it (the bent bit)
Straighten the backing plate with a hammer and a block of wood.
Re-assemble in reverse order.
Might pay to fit new handbrake shoes while you have it apart.
does your other transfer case have a spot for the 4wd switch?
if so I'll take it. LOL
do what want33's said, Problem solved
I hate going to weddings because all the grandma's used to poke me in the ribs saying you're next, you're next. They've stopped doing it since I started doing it to them at funerals.
