Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where is the Chassis Number Stamped on a 1999 GU Pootrol??

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Where is the Chassis Number Stamped on a 1999 GU Pootrol??

Post by Simo63 »

Man I've been looking for this everywhere since the roadworthy place told me they couldn't find it today.

Any ideas fellow GU Owners???

Cheers
Simo
TD 80 Series, F&R Lockers, Winch etc
Top
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

Look in the manual. Its on the rail on the driver side between the B pillar mount and the A pillar bodymount.

I think.
Top
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Post by Simo63 »

Yom wrote:Look in the manual. Its on the rail on the driver side between the B pillar mount and the A pillar bodymount.

I think.
Thanks for that. Unfortunately I don't have a manual otherwise that would have been he first place I looked. Tried googling it as well but no success. Will look where you suggested.

Cheers
TD 80 Series, F&R Lockers, Winch etc
Top
Posts: 203
Joined: Sun Sep 19, 2004 5:59 pm
Location: Brisbane

Post by choppa1978 »

left rail between the shock tower and radiator on the top
HRASS Motorsport

PH: 0437 447177
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

Yom wrote:Look in the manual. Its on the rail on the driver side between the B pillar mount and the A pillar bodymount.

I think.
I have seen them here but be careful, sometimes they are sand blasted that bad that they are hard or impossible to read. Only on the early ones though, later ones are back up on the top of the chassis as suggested by choppa.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Post by Simo63 »

Yom wrote:Look in the manual. Its on the rail on the driver side between the B pillar mount and the A pillar bodymount.

I think.
And we have a winner :D ..... Yom is da man. mkpatrol was right also as it's a Jan 1999 build and if you guys didn't tell me it was there then I probably wouldn't have found it ... it's only lightly stamped from factory, grotty plus sand blasted a lot as well.

Thanks for the help Yom, Choppa1978 and mkpatrol :armsup:

Simo
TD 80 Series, F&R Lockers, Winch etc
Top
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

Now this thread has been finalised, It's Wazza time!!!!!!

Simo63 wrote: Unfortunately I don't have a manual otherwise that would have been he first place I looked.
I think the auto is the same as a manual!!

:rofl:
I'm the sharpest tool in the shed!
Top
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Post by Simo63 »

v6hilux wrote:Now this thread has been finalised, It's Wazza time!!!!!!

Simo63 wrote: Unfortunately I don't have a manual otherwise that would have been he first place I looked.
I think the auto is the same as a manual!!

:rofl:
:D :rofl:

Wazza Sez "I iz unda ya GU Hiddin ya chazzi numba"'
TD 80 Series, F&R Lockers, Winch etc
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests