Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where is the fuel adjustment on a 12H-T injector pump?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 438
Joined: Tue Feb 20, 2007 7:34 am
Location: Gordonvale Queensland

Contact:
Contact flyology

Where is the fuel adjustment on a 12H-T injector pump?

Post by flyology »

Does anyone have a picture of where the fuel adjustment is on a 12H-T?

if no picture, maybe a description?

cheere,

MB
Top
Posts: 4607
Joined: Sun Oct 22, 2006 8:11 pm
Location: yallourn north,victoria

Post by tna racing »

shouldnt there be a long screw with a nut on it with a bit of wire (stop you playing with it ) or are they different to the nissans?
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
Top
Posts: 438
Joined: Tue Feb 20, 2007 7:34 am
Location: Gordonvale Queensland

Contact:
Contact flyology

Post by flyology »

Anyone?????

Maybe time for a PM to Dumbdunce.............
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

http://www.outerlimits4x4.com/phpBB2/search.php
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 438
Joined: Tue Feb 20, 2007 7:34 am
Location: Gordonvale Queensland

Contact:
Contact flyology

Post by flyology »

Did the search thing first, came up with nothing. have also searched the tech files, cant find anything about the fuel adjustment for the 12HT pump, plenty on the 2H pump...
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

tna racing wrote:shouldnt there be a long screw with a nut on it with a bit of wire (stop you playing with it ) or are they different to the nissans?
There's a few of them IIRC
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

flyology wrote:Did the search thing first, came up with nothing. have also searched the tech files, cant find anything about the fuel adjustment for the 12HT pump, plenty on the 2H pump...
same pump i thaught

just the 12ht has the turbo thing on the back?.? boost compensator and altitude compensator.
Top
Posts: 438
Joined: Tue Feb 20, 2007 7:34 am
Location: Gordonvale Queensland

Contact:
Contact flyology

Post by flyology »

Same pump body, but the boost compensator is on the back where the fuel adjustment is on on a 2H pump.....

Will post a picture of a pump tomorrow.

(too bloody tired after arvo shift today.....)
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

i believe it is on the front of the governor housing right where the first injection line comes out.

It should have a cap-nut on it.(unless it has been lost) which you need to take off first.

You need to use about a 12mm(10?) spanner and an allen key. The allen key goes into the middle to adjust, the 12mm spanner to crack the locking nut.

no idea which way to wind it to increase fuel.
Top
Posts: 40
Joined: Sun Sep 18, 2005 11:54 pm
Location: Perth Western Australia

Post by Tim HJ61 »

Any pictures or accurate descriptions yet?
Top
User avatar
toaddog
Tickle me!
Posts: 3824
Joined: Wed Jun 23, 2004 11:25 pm

Post by toaddog »

flyology wrote:Same pump body, but the boost compensator is on the back where the fuel adjustment is on on a 2H pump.....

Will post a picture of a pump tomorrow.

(too bloody tired after arvo shift today.....)
Tired?

Its not like you don't spend the whole shift sitting down anyway.....
2008 Patrol wagon and 99 Patrol TD Ute
Cairns
Top
Posts: 40
Joined: Sun Sep 18, 2005 11:54 pm
Location: Perth Western Australia

Post by Tim HJ61 »

Try this link for pictures and description
Canola powered 12H-T HJ61 24V, GTurbo, FMIC, locked, Bilsteins, 3" exhaust. 450nm.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests