HZJ105R with 315/75/16

[98lux]

Will the 315/75/16's fit with a 3" lift and -10 off set rims (16x8')

[JOHNZ]

They will rub on the front mudflaps & on the rear inner arches

[CRUIZED]

Whats the recomendation John ? bigger offset??
Longer front radius arms to bring the wheel base back to factory wheelbase or extending it marginaly via longer arms

I've got A HZJ 105R as well -2" lift ....for playin in the mud I got 35x11.5 simex on 16X8 factory rims only just scrub on the front but as mentioned above the rear scrubs to much while flex .

285/75 R16 dont srub at all -- 305/75 R16 ?? might be close

[scottmcguinness172]

ive got a100 series with 315/75/16's on 16x10 -44 offset the passenger side just touches the inner guard but i took the mud flap off the drivers side was touching i just attacked the join on the body with the grinder and its sweet now

[JOHNZ]

Whats the recomendation John ? bigger offset??
Longer front radius arms to bring the wheel base back to factory wheelbase or extending it marginaly via longer arms

I've got A HZJ 105R as well -2" lift ....for playin in the mud I got 35x11.5 simex on 16X8 factory rims only just scrub on the front but as mentioned above the rear scrubs to much while flex .

285/75 R16 dont srub at all -- 305/75 R16 ?? might be close

Mate i just bent the front mudflap bkt to pull the flap back a little .
On the rear i am going to fit 6mm wheel spacers & not going to worry about the rubbing after that.
The rubbing in the rear guards will do no damage.
Longer arms in the is very expensive & I can justify sort of cost just to stop a little rubbing.