Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

100 series abs bleeding breaks

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1101
Joined: Mon Feb 21, 2005 7:12 pm
Location: Gold Coast/Ormeau

100 series abs bleeding breaks

Post by scottmcguinness172 »

hey all i need to bleed my brakes as i changed all the brake lines is there anything special to do or is it just the same a doing a non abs car? just start at ur furthest away brake and work ur way in? and keep fluids up
1992 Dual Cab 80 series cruiser Factory Turbo 35"mtz's 5" Lift, Rear Locker
Team Blue Dog Off Road
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Is it the electric booster or vaccum
plenty of parts on the bench
Top
Posts: 1101
Joined: Mon Feb 21, 2005 7:12 pm
Location: Gold Coast/Ormeau

Post by scottmcguinness172 »

im not sure mate im guessing its vaccume
1992 Dual Cab 80 series cruiser Factory Turbo 35"mtz's 5" Lift, Rear Locker
Team Blue Dog Off Road
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

On the Resivior cap does it say use only dot 5 fluid or does it say dot3 or 4 fluid. If it say dot 5 don't put your normal dot 3/4 fliud it'll cost heaps to fix it.
plenty of parts on the bench
Top
Posts: 1101
Joined: Mon Feb 21, 2005 7:12 pm
Location: Gold Coast/Ormeau

Post by scottmcguinness172 »

thanks ill check it out today i havnt put the new brake lines on yet
1992 Dual Cab 80 series cruiser Factory Turbo 35"mtz's 5" Lift, Rear Locker
Team Blue Dog Off Road
Top
Posts: 73
Joined: Sun Oct 28, 2007 1:40 pm
Location: Melbourne

Post by rodrocket »

greetings all

i was looking ata 100 series today & noticed all the electric's on the master cyl

what is involved to bleed the electric system

regards
rod
Top
Posts: 310
Joined: Thu Apr 20, 2006 10:38 am
Location: Melb. AU

Post by hdj105 »

Dot 3 fluid only.

Fronts as per normal.

Rears ignition must be on and no need to pump pedal, simply depress pedal and crack nipple and a constant stream will evolve.
Greg G
2000 HDJ105
Top
Posts: 73
Joined: Sun Oct 28, 2007 1:40 pm
Location: Melbourne

Post by rodrocket »

thanks for that Greg

much appreciated

regards
rod
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 7 guests