Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Td42 Gq Diesel tacho question

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 27
Joined: Sun Jul 16, 2006 7:39 pm
Location: Ipswich Qld

Td42 Gq Diesel tacho question

Post by leesmkshorty »

Hi Guro's
Just done a crossover for a Td42 from a SWB to a LWB
and notice the tacho is sitting right around past the 8 etc
is there anything special i needed to do when hooking up the wiring in the LWB.
The oil pressure is no connected yet either as i need to get a 2 wire pressure switch so my gauges work
Will this have something to do with it.
Top
Posts: 287
Joined: Sun May 01, 2005 2:33 pm
Location: Sydney

Post by michael a »

Was the LWB a petrol or Diesel?

You need a diesel dash for it to work.


also look at the plug where it connects from the cam sensor
get under it
Top
Posts: 27
Joined: Sun Jul 16, 2006 7:39 pm
Location: Ipswich Qld

Post by leesmkshorty »

Thanks Michael

I worked it out, when I bought the car it had no motor or box and the guy had completly change the wiring from petrol to diesel.
The dash was also changed and the tacho had spun around to the 8rpm
so all i did was take the clear cover off around put the needle back around to the stop, and guess what it works

so thanks again
Lee
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests