Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1HD-FTE into an 80...

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Mark
The plug at the front of the fuel pump is engine speed feedback. Im guessing the wires going from it to the ecu supply this feedback to the ecu first, and thats why you get idle with clutch in....(accelerator position matches revs) from there it goes to the dash to run tacho. and, another guess is it gets the spedo pulse feedback from the spedo aswell.
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

well it came down to a crushed hard line that runs under the rocker cover. it went from manifold pressure to the boost pressure sensor, now it bloody goes like a rocket for having 35" tyres...

many thanks to jimmy beam and scuba steve for working out what it was..
still no tacho but will get a auto elec to work that one out.. now off again to drink some more.

cheers all..
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 750
Joined: Fri Oct 17, 2003 9:07 pm
Location: Albury

Contact:
Contact MUD000

Post by MUD000 »

:armsup: :armsup: :armsup: :armsup: :armsup:
Bring it on
Cheers Dan
06 Dual Cab Hilux Loaded with ARB
80 Series With L98 6ltr 35's 4L80E Locked & Loaded
84 Extra Cab Hilux Build up fun car
96 Dual Cab Hilux build up Long range play car
www.trailtrack4x4.com
Top
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Contact:
Contact Suspension Stuff

Post by Suspension Stuff »

You might need that extra power if those 6m waves start chasing you up the beach. The beach might be a bit of a fizzer after all.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Top
Posts: 79
Joined: Sun Aug 08, 2004 5:36 am
Location: Heathcote,Sydney

1HDFTE

Post by Grasshopper »

Has a tech write up been done yet on this subject?
Top
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Re: 1HDFTE

Post by fester2au »

Grasshopper wrote:Has a tech write up been done yet on this subject?
Don't think so.

Anyone know anyone who's got the tacho workign on one of these and can share the solution?????????? :idea:
Top
Posts: 79
Joined: Sun Aug 08, 2004 5:36 am
Location: Heathcote,Sydney

Tacho

Post by Grasshopper »

Mate, try Jason at Total Care 4wd in Seven Hills Sydney. He has done the conversion of 1HDFTE with 5 spd auto into his 75 series.
Top
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Re: Tacho

Post by fester2au »

Grasshopper wrote:Mate, try Jason at Total Care 4wd in Seven Hills Sydney. He has done the conversion of 1HDFTE with 5 spd auto into his 75 series.
Thanks chief I will but I'll bet he used the dash as well. Looked at a 79 series and the dash still looks like older utes and that would be the easiest. I was goign to see if the innards of the ute tacho would graft intot he wagon but the size and sweep are different. Maybe I need to look at a 100 series dash.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 9 guests