Need opinions of which bolt on rear shock mount to get.
Cheers Mitch
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Whats the best way to invert rear shocks-Help needed!
Whats the best way to invert rear shocks-Help needed!
1989 LN106- 2" spring lift, 285 mt117's, 4.8's, front spartan high pinion'd, 6000k H/L HID
[/img]
if fitting LONGER travel shocks what are our options.bazooked wrote:firstly why do u need one of these? if ur after more travel it wont give it to u,for starters if ur shocks are angle in u will have a crap ride and it will handle like shit, if u have a spoa its still n ot required, if u have ur suspension set up right its not required.
i DONT want to cut into my floor for shock mounts!
michael
have a look at the pic and at ur own vehicle and tell me how much of that travel u actually use when ur shocks are in such an angle, u might get a bit of a shock. ive had spring ova zooks and an overkill coiled zook and neva had to do this and still had enough travel left not to stuff up the shocks, do ur homework and take sum measurements do sum simple mods and u might be pleasantly suprised.11_evl wrote:if fitting LONGER travel shocks what are our options.bazooked wrote:firstly why do u need one of these? if ur after more travel it wont give it to u,for starters if ur shocks are angle in u will have a crap ride and it will handle like shit, if u have a spoa its still n ot required, if u have ur suspension set up right its not required.
i DONT want to cut into my floor for shock mounts!
buggy time............
I don't think these are really necessary either, I've seen plenty of zooks with huge travel and big lift without them. Shit my 5" lift doesn't require them FFS and I have bucket loads of shock travel left. I can't see SPOA being much worse. It's just a matter of picking the right shock, and there certainly isn't a shortage of choice or info on the subject. Fitting cheaper shocks is the only benifit I can see of this setup on anything but rediculously modded comp vehicles (in which case better suspension designs are available)
X eleventy. Laying the shocks over at such an exaggerated angle heavily reduces their effectiveness, by reducing the effective shaft speed, messing with the velocity sensitive valving.bazooked wrote: have a look at the pic and at ur own vehicle and tell me how much of that travel u actually use when ur shocks are in such an angle, u might get a bit of a shock. ive had spring ova zooks and an overkill coiled zook and neva had to do this and still had enough travel left not to stuff up the shocks, do ur homework and take sum measurements do sum simple mods and u might be pleasantly suprised.
It's pretty funny really - a stock sierra shock is 6" travel. In the angle they're mounted in a stock sierra, they're probably able to provide about 7" of actual wheel movement.
A stock sierra shock laid over at 45Ëš would allow 8.4" of wheel travel - way beyond what stock rear springs can allow.
laying over a 10" shock at (say) 45Ëš provides 14" of wheel movement... more than any leaf sierra could hope to produce.
"Inverting" rear shocks is really only a way of running "generic" shocks and allowing for large spring lifts.
Even with the setup I build using N76 shocks, there's about 4" of wasted shaft travel with an OME sierra rear spring and longer shackles, and that's with the shocks through the floor and trying to mount them as vertical as possible.
Anyway, if you have all the other work done to use shocks this long, you are way beyond a bolt in rear shock mount.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
i found the limiting factor in the rear suspension in my sierra was the shocks and the CHEAPEST solution was to move the top mounts inwards. im not worried about how it handles as it only gets driven on a weekend when i have time. If it was a daily driver then maybe i would do something else.
And the question that was asked was
bring it on!!! Flame suit ready
And the question that was asked was
not what do you think i shouldnt do.Need opinions of which bolt on rear shock mount to get.
bring it on!!! Flame suit ready
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Lots of custom gear as I cant afford the proper stuff.
I'll be putting mine on an angle in the next couple of weeks because its the cheapest and easiest option for me. I've been driving a few km's latley with no shocks in the rear at all and i reckon angle mounted shocks would have to be a slight handleing improvement?
More Suzuki parts going to the big Suzuki Heaven in the sky!
i do understand the valving issues experienced with putting shocks on an angle but i have long ranchoes that i want to use and dont want to cut holes in the floor to stick shocks thru!!! what are my other options??
the only real thing i can think of is doing a swap with someone else for shockies!
what are these n76 ones your talking about steve? got any pics of the 'thru the floor setup'??
the only real thing i can think of is doing a swap with someone else for shockies!
what are these n76 ones your talking about steve? got any pics of the 'thru the floor setup'??
michael
Basically as Gwagensteve has has about laying over your shocks is that when your Shocks are inverted 45Ëš When you say your wheel or axle travels up over a bump the say it moves only 1inch up your shock its only moving roughly 1/2 a inch its roughly only doing half its job it could be.11_evl wrote:i do understand the valving issues experienced with putting shocks on an angle but i have long ranchoes that i want to use and dont want to cut holes in the floor to stick shocks thru!!!
Im running inverted Rancho Rs5000s they work well in the slow stuff but on the road it roles around like a boat, I put up with it though. I now have RSX91119's for the rear so Im going to try running a harder setting to get a better ride out of the rear on the road. As for the front I have longer shock towers and the shocks mount to the diff. If you just invert the rear and dont match up the front your going to have a 4by that doesn't flex equally which can make it become unstable at times or in certain situations.
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
thankx mud but i dont think u understood. i have the same setup as just cruizin with my longer ranchos at 45 degress, i AM experiencing bad handling especially with a load, (VERY BAD) and was very interested to find a way to fix, make them more vertical, the problem WITHOUT cutting into my floor or REPLACING my ranchos. but i can replace if i can get a better ride but would rather not as i have them and it would COST money to change
michael
Yes but if I were the person asking I would appreciate being told that's it's not the best idea and given the justification why. That's why I consult these forums, to gain the collective knowledge of experienced members. I'd rather be told now then find out down the track after I've spent the money. I just wish people would do a little more research and for once actually use the search button 
End rant.
End rant.
Yes you loose the dampening effect by inboarding the shocks but don't forget the shocks most ppl end up running aren't designed for the light weight Sierras, most are for vehicles almost twice the weight therefore the valving is drastically different.
To fit long travel shockies anything longer then standard are you going to limit up travel? Mostly yes because to get get drop even for 2" springs the shockies will limit compression. As you can see from my previous pic I touch the bumpstops and this is with 4 wheels still on the ground.
To fit long travel shockies anything longer then standard are you going to limit up travel? Mostly yes because to get get drop even for 2" springs the shockies will limit compression. As you can see from my previous pic I touch the bumpstops and this is with 4 wheels still on the ground.
;)
take ur shocks out ramp it and measure it, its the only way ur goin to no what length shock to fit, ur obviously not spring ova and only runnin a 2" spring lift according to ur sig, do sum home work take a tape measure with u and start measuring shocks that will fit, like has been mentioned earlier there is no need for all this layover crap.11_evl wrote:thankx mud but i dont think u understood. i have the same setup as just cruizin with my longer ranchos at 45 degress, i AM experiencing bad handling especially with a load, (VERY BAD) and was very interested to find a way to fix, make them more vertical, the problem WITHOUT cutting into my floor or REPLACING my ranchos. but i can replace if i can get a better ride but would rather not as i have them and it would COST money to change
buggy time............
N76 is the model number of a very long, very soft OME shock, designed for old school VW suspension based off road race buggies. It has about 10.75 inches of travel, plenty for pretty much any application except compensating for something and boasting on internet forums.
From top to bottom, here's the lengths of some shocks for comparison.
Stock sierra front
Stock sierra rear
RS9026 (can't remember, we wanted a 9010 but that wasn't available)
N76
OME 80 series rear.
In any case, the N76 isabout 4" longer than a sierra needs, even with RUF in the front, but it's valving is beautifully soft, is easy to get, and has a good performance/price ratio.
These are the only photos I've got really.
The body wasn't sitting down on the chassis in these shots. The mount sits about 3/4" though the floor with a 2" BL and 2" bumpstop spacers. with neither, the mount would be 4" through the floor. obviously with a spoa, you'll have to work mount height out based on bumpstop location.
Laying shocks over is really very hit and miss for length and valving.
Steve.
From top to bottom, here's the lengths of some shocks for comparison.
Stock sierra front
Stock sierra rear
RS9026 (can't remember, we wanted a 9010 but that wasn't available)
N76
OME 80 series rear.
In any case, the N76 isabout 4" longer than a sierra needs, even with RUF in the front, but it's valving is beautifully soft, is easy to get, and has a good performance/price ratio.
These are the only photos I've got really.
The body wasn't sitting down on the chassis in these shots. The mount sits about 3/4" though the floor with a 2" BL and 2" bumpstop spacers. with neither, the mount would be 4" through the floor. obviously with a spoa, you'll have to work mount height out based on bumpstop location.
Laying shocks over is really very hit and miss for length and valving.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
I too agree there is no need to be laying shocks over if your still using sierra leaf packs...you just don't need them. I have done the measurements both with my current setup and how I used to run (2" spring, 2" shackle and 2" body) and the travel just isn't there to require a longer shock. I think some people are getting a bit confused when chosing their shocks. You may be using a certain amount of travel on droop but then hardly compressing the shock at all under up travel. The best way is remove all the shocks, flex it up, measure front and rear and consult a shock guide to chose the most appropriate length and valving to suit your needs. I got procomps front and rear and they are spot on the right length and offer a very balanced and quite comfy ride.
01 GU Patrol 4.2TD Wagon
Who is online
Users browsing this forum: No registered users and 72 guests