Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wiring Internal Switch for Titan Solenoid

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 138
Joined: Mon Mar 15, 2004 9:47 pm
Location: Gladstone

Contact:
Contact Hardcorr

Wiring Internal Switch for Titan Solenoid

Post by Hardcorr »

Can anyone tell me how they wired an internal control switch for the Titan Solenoid pack?
Off the three spades, the center one is earth, and the other two are in and out, how is this wired?

Cheers
Corry
'98 80 4.5/Auto 40th Anniversary - Tour
'92 80 6.5V8TD/Auto/37's - Toy
VE HSV Senator 6.2/Auto - Play
Top
Posts: 579
Joined: Mon May 29, 2006 4:36 pm
Location: Melbourne

Post by bigcam »

eath the centre pin then use a 2 way rocker with 12v in the middle and each side going to the in and out terminals (either side of the one you just earthed.) put an isolator on the 12v feed so people cant just hit the switch when pissed in your car!
[quote="75 cruser"]we want more donkey[/quote]
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests