Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

15bt in a 80series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 10
Joined: Sun Apr 16, 2006 8:06 pm
Location: sunshinecoast

15bt in a 80series

Post by rocketman »

been looking at replacing 1hz done 340000kms in my 80 with factory turbo engine we hav done a 1hdfte conversion in my mates 47series with no dramas and goes great but we are looking at doing something different and going 15bt in the 80 with intercooler has anybody done this conversion :?: are they the same bellhousing bolt pattern as 1hz box any thoughts :?
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Re: 15bt in a 80series

Post by midi73 »

rocketman wrote:been looking at replacing 1hz done 340000kms in my 80 with factory turbo engine we hav done a 1hdfte conversion in my mates 47series with no dramas and goes great but we are looking at doing something different and going 15bt in the 80 with intercooler has anybody done this conversion :?: are they the same bellhousing bolt pattern as 1hz box any thoughts :?
You will need the B series bell housing and the B series gearbox.
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

I thought some of the jap spec ones had this engine?

4L 4 cylinder?

be cheaper on rego and insurance too, and you wouldnt lose much powa! schweeeet
hands and mums dont count!!!
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

These motors are not cheap either....they make more torque than a hdft and lower in the rev band too..so good for crawling...but highway might not be as good unless you go higher final drive.
You cant beat the straight in swap of the hdft in place of the 1hz...even the hdfte is do-able with wiring mods...
Andrew
Posts: 10
Joined: Sun Apr 16, 2006 8:06 pm
Location: sunshinecoast

Post by rocketman »

agree with you andrew would probably be easier to put 1hdfte in like i said we did my mates 47series ute with not any real dramas and with piggyback computers goes hard :D i run 35s so not sure on how the gearing would go on the 80 but after seeing that 40series shorty from malaysia with a 15bt in it go it might be worth the hassles hav seen 15bt,s for sale for 5500 exchange but not sure how much outright :?:
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest