Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

T - Belt warning light stays on in the Hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

T - Belt warning light stays on in the Hilux

Post by RN »

Just returned from Cairns and I had the use of my SIL's twin cab tray Hilux diesel. It is a 4 cyl and I noticed that the T Belt light was constantly on. The belt has been changed but how do you re set this warning light?
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Contact:
Contact bj42turbo

Post by bj42turbo »

Is there a small rubber gromet near the speedo reset button by any chance

BJ
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

BJ,

I am back in Vic now so I have no idea about the grommet. My BIL was informed that he would have to dismantle the dash to re set it but there must be an easier option.

UPDATE
Just googled the question and found this...will email the BIL.

http://www.exploroz.com/Forum/Topic/122 ... Light.aspx
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

What year model is it?
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

Not sure....
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

RoadNazi wrote:Not sure....
Was it an old one or a new one?
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Look down at the bottom of the speedo and there should be a small hole that you can poke a small screwdriver in and push the button. There might be a rubber gromet over the hole.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 207
Joined: Mon May 02, 2005 9:37 am
Location: melbourne

Post by YB.LOW4 »

to reset it you pull the grommet out as stated earlier and then you unscrew the needle that is next to the grommet, that is used for reseting your trip meter and poke that needle thru the hole from where the grommet was.
Gu Ute,
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Like this
Image
if it's mid 97 an on it'll be pull the dash out job
plenty of parts on the bench
Top
Posts: 207
Joined: Mon May 02, 2005 9:37 am
Location: melbourne

Post by YB.LOW4 »

yeah like that unscrew the "stick" on the right and push th button behind the grommet with it.
Gu Ute,
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

Sic Lux wrote:Like this
Image
if it's mid 97 an on it'll be pull the dash out job

Got a feeling it is a post '97 model. Thanks for the picture SL
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

RoadNazi wrote:Got a feeling it is a post '97 model.
This is possibly the screw to swap holes to reset the t/belt light;

Image
I'm the sharpest tool in the shed!
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

v6hilux wrote:
RoadNazi wrote:Got a feeling it is a post '97 model.
This is possibly the screw to swap holes to reset the t/belt light;

Image
So what do you do at the next interval? Just swap it back to the other hole?
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Yeah i'd say so, Each time the belts done just swap holes
plenty of parts on the bench
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests