wel it happened on friday nite on my way to tin can and i was using my spotties as usual and then i flicked them off as a car was coming the other way. Then wen i turned them back on .. nothing. i checked my relay and even changed it, it clicks when i turn on my highbeam and spotties but no actually spotties are turning on.
Wat would be causeing this to happen?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
spot light problems
Moderator: -Scott-
spot light problems
NECKUPYAPARROT4x4
Tosa_03
Proudly sponsored by and part of:-
Tosa Racing Co.
Tosa_03
Proudly sponsored by and part of:-
Tosa Racing Co.
First thing to check is the fuse from the battery to the relay, if that fails....
Use a multimeter to test for power on the relay while the spotlights are on. Check voltages on pins 86, 87 and 30.
86 is +12V from the switch, 30 and 87 are the switched circuit going from direct to the battery on one of them (via a fuse I hope), and direct to the spotlights on the other (it doesn't matter if 30 & 87 are around the other way).
When the switch is on, you should have +12V on all 3 of these pins.
If you get voltage on 86, but no voltage on 30 or 87 (which i'm guessing is the case, as you said it clicks), you either have a non functioning relay - unlikely, or you have a problem with the +12V in from the battery direct to the relay. If you have voltage on all 3, and the spotlights don't work, then the problem is somewhere between the wire from the relay to the spotlights.
Use a multimeter to test for power on the relay while the spotlights are on. Check voltages on pins 86, 87 and 30.
86 is +12V from the switch, 30 and 87 are the switched circuit going from direct to the battery on one of them (via a fuse I hope), and direct to the spotlights on the other (it doesn't matter if 30 & 87 are around the other way).
When the switch is on, you should have +12V on all 3 of these pins.
If you get voltage on 86, but no voltage on 30 or 87 (which i'm guessing is the case, as you said it clicks), you either have a non functioning relay - unlikely, or you have a problem with the +12V in from the battery direct to the relay. If you have voltage on all 3, and the spotlights don't work, then the problem is somewhere between the wire from the relay to the spotlights.
Who is online
Users browsing this forum: No registered users and 0 guests