spacers how much ??

[DEZ]

looking at some wheel spaces for my gq just seeing if anyone knows what sizes they come in and a general price range.

cheers dez

[sloshy]

round about $160 - $180 each here but are far cheaper in the states.
Range from 1 inch to 3 inch.

But someone is usally selling a second hand pair on here.

[DEZ]

ah right you wouldnt know any sites from the states that sell them

thanx mate

[75 cruser]

why bother going to america to buy them when you can buy them hear ??????

http://72.34.32.141/~snakerac/index.php ... 15e101ab8b

rob

[locktup4x4]

ah right you wouldnt know any sites from the states that sell them

thanx mate

You can get them in 1", 1.25", 1.5", 2" and 3".

Info here.
http://www.locktup4x4.com.au/product/c5 ... 9c0ba.aspx

Jason

[DEZ]

few sizes.... im doing a 3" lift kit and running 33s, in the future might do a body lift to run 35s any ideas what sizes would work well with this set up (never done spacers before)

cheers dez

[75 cruser]

does your tyre rub on the chassie now ?????, just work out when the truck is flexed up how much clearance you will need, all of this will probley change when you put youe 35s on.

im not a big fan of wheel spacers id rather buy the right rims for $80-$100 buck each just a thought

rob

[DEZ]

na no scrubing can you get like sunraysias in a bigger offset which would give you the width without doing spacers ?

[RUFF]

why bother going to america to buy them when you can buy them hear ??????

http://72.34.32.141/~snakerac/index.php ... 15e101ab8b

rob

Or here in Australia at a realistic price-

http://www.locktup4x4.com.au/product/c5 ... 9c0ba.aspx

Lockedup4x4 = $119.43 + Shipping for 2 spacers. Using matching Toyota 12.5mm Wheel Studs.
Snake racing = $165 + Shipping for one spacer. Using 1/2" Wheel studs that will require you to buy new wheel nuts if your toyota wheel nuts if your wheels do not use standard wheel nuts.

[RUFF]

does your tyre rub on the chassie now ?????, just work out when the truck is flexed up how much clearance you will need, all of this will probley change when you put youe 35s on.

im not a big fan of wheel spacers id rather buy the right rims for $80-$100 buck each just a thought

rob

The problem with buying wheels is some end up needing 2 sets of wheels so they can still drive the vehicle on the street. Comp only car buy the right wheels. If you are street driving it as well and can not do so with the wheels sticking out the guards then wheel spacers are a great idea. And much easier to transport to the trails than another set of wheels.

[75 cruser]

why bother going to america to buy them when you can buy them hear ??????

http://72.34.32.141/~snakerac/index.php ... 15e101ab8b

rob

Or here in Australia at a realistic price-

http://www.locktup4x4.com.au/product/c5 ... 9c0ba.aspx

Lockedup4x4 = $119.43 + Shipping for 2 spacers. Using matching Toyota 12.5mm Wheel Studs.
Snake racing = $165 + Shipping for one spacer. Using 1/2" Wheel studs that will require you to buy new wheel nuts if your toyota wheel nuts if your wheels do not use standard wheel nuts.

all ways a trick with old snake racing every time ive bought some thing off him thier has been a catch

thanks ruff

rob

[locktup4x4]

Everyone has there own ideas. I ran 2" spacers front and rear with 38" TSL SXs and the tires didn't hit the front leaf springs or the chassis above the rear tire. Now I'm running 39" BFGs with the same 2" spacers and the tire touches the front lower link rod at full lock. It doesnt rub bad enough for me to worry about. Plus I don't want to put 3" spacers on my heavy 4runner.
I don't think you would need anything bigger than 1.5" with your size tires.

Jason

[75 cruser]

hear you go wheel spacers

http://www.outerlimits4x4.com/phpBB2/vi ... p?t=129171

rob