Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

H260 Axle shims?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

H260 Axle shims?

Post by RUFF »

What are they there for? Doing some work on a Semi float H260 that was disassembled before i got to it and it has shims for the axle but im not sure why they even need them. Its a drum brake H260 if it makes any difference.
Top
Posts: 412
Joined: Fri Jul 14, 2006 6:03 pm
Location: brisbane

Post by rvh96 »

wheel bearing adjustment if its the ones behind the wheel bearing retainers your referring to
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

rvh96 wrote:wheel bearing adjustment if its the ones behind the wheel bearing retainers your referring to
Its the shim between the housing and the wheel bearing carrier/housing. Where you would unbolt the axle when removing it.
Top
Posts: 412
Joined: Fri Jul 14, 2006 6:03 pm
Location: brisbane

Post by rvh96 »

yes their for wheel bearing adjustment as the axle bottoms on a thrust pad you nead to shim the retainer to achieve the right preload on the wheel bearing
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests