Well the 20 sets are about half way complete should be finished by xmas or early in the new year.
Price will be EXTREMELY competitive to Toyo/Nissan gears.
Remember these will fit all 1.944/1.925:1 Mitsi t/cases (all Gen 1 2.6, diesel & 3.0V6 + Gen 2 3.0 V6), they do not fit the larger 1.90:1 2.8TDI/3.5V6 t/cases.
Also fit 5sp Challenger (not auto's) and all diesel and V6 Tritons (except the brand new 2.8TDI).
Frank.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2.85 t/case gears update.
Moderator: -Scott-
2.85 t/case gears update.
I just luv my "clacker Jabber"
Up for grabs mate, 15 manuals and 5 auto's.
Contact Mark Hardman at hadbro@hotkey.net.au
Contact Mark Hardman at hadbro@hotkey.net.au
I just luv my "clacker Jabber"
Yes there are 15 x fine 24 spline (manuals) and 5 x coarse 23 spline (auto's) being made.
I just couldn't find anyone who had a separated NP231 t/case, if you have one up there I can mail you the spare 23 spline input gear I have to check but I will need it back.
Frank.
I just couldn't find anyone who had a separated NP231 t/case, if you have one up there I can mail you the spare 23 spline input gear I have to check but I will need it back.
Frank.
I just luv my "clacker Jabber"
Hi Frank,
My main interest in the 23 spline issue is pursuing a stronger mitz transfer than my 85 SD L300 24 spline, although compatability with NP231J is of interest. My real concern is the gearbox output shaft diameter that the 24 tooth spline dictates, real puny. I want the strongest output shaft possible so that when something breaks its not an expensive trans rebuild. This all assumes that the 23 spline is stronger than the 24.
Novac show a real short 231 output shaft that is a stock of the shelf item and if it fits a mitz 23 spline then I would not need to have a custom shaft made initially and, more importantly, a second or third time in the future.
If the 23 spline mitz is unique then I am sure that Mark can make me a shaft to suit its just off the shelf vs custom at this point.
It may be possible for me to take your output gear to Sydney 2nd week of Jan if the jeep guy still has a trans on the floor.
Thanks for your help so far, Regards, Al.
My main interest in the 23 spline issue is pursuing a stronger mitz transfer than my 85 SD L300 24 spline, although compatability with NP231J is of interest. My real concern is the gearbox output shaft diameter that the 24 tooth spline dictates, real puny. I want the strongest output shaft possible so that when something breaks its not an expensive trans rebuild. This all assumes that the 23 spline is stronger than the 24.
Novac show a real short 231 output shaft that is a stock of the shelf item and if it fits a mitz 23 spline then I would not need to have a custom shaft made initially and, more importantly, a second or third time in the future.
If the 23 spline mitz is unique then I am sure that Mark can make me a shaft to suit its just off the shelf vs custom at this point.
It may be possible for me to take your output gear to Sydney 2nd week of Jan if the jeep guy still has a trans on the floor.
Thanks for your help so far, Regards, Al.
Who is online
Users browsing this forum: No registered users and 32 guests