Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mq diffs under 75 series?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 23
Joined: Tue Jan 08, 2008 3:02 pm
Location: CAIRNS

mq diffs under 75 series?

Post by todsmods »

Has anyone fitted nissan leaf sprung diffs under a 75 series toyota?
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

no why would they want to do such a thing........
www.overkill4x4.com
ph 94766137
Top
Posts: 23
Joined: Tue Jan 08, 2008 3:02 pm
Location: CAIRNS

Post by todsmods »

sick of braking cv's, dont need to run wheel spaces and wont have drama's with rear hub studs braking
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

MQs break lots of CVs and dont have the strongest axles either.... maybe GU or GQ if on a budget.
turbos are nice but i'd rather be blown
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

$600 for longfields and its bolt in.
Bugger all $$$$ and getting a few holes redrilled and tapped to up grade to 10mm unbreako's

Both alot easier quicker and probably cheaper then changing diffs.
MQ diffs :rofl: No thanks, even GU diffs no thanks, theres way better then them around for the same dollars and a bucket load less work.
Top
Posts: 1908
Joined: Thu Aug 04, 2005 8:09 pm
Location: central queensland

Post by known 2 »

have 6 extra holes drilled in ur rear hubs and 6 xtra studs or bolts put in.
twice the strength held up on my v8 powered 75.

as for cv's get heat treated ones or just drive more gently.
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .

86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

why not try zook or lada instead
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Top
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

i would question who is fitting your axles and cv's or who is building your diffs. they're not that weak if they're put together right.
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

mule75 wrote:i would question who is fitting your axles and cv's or who is building your diffs. they're not that weak if they're put together right.
OK, how do you figure that? 75 series CV's are quite small. 75 series rear axle studs let go.

No matter how well a diff is put together to factory spec there's every chance with larger tyres tha you'll break a CV.

MQ diffs will be narrower than 75 series, MQ steering is good, MQ axles not so good. As Guts said just buy Longfields and save yourself lots of work.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

sierrajim wrote:
mule75 wrote:i would question who is fitting your axles and cv's or who is building your diffs. they're not that weak if they're put together right.
OK, how do you figure that? 75 series CV's are quite small. 75 series rear axle studs let go.

No matter how well a diff is put together to factory spec there's every chance with larger tyres tha you'll break a CV.

MQ diffs will be narrower than 75 series, MQ steering is good, MQ axles not so good. As Guts said just buy Longfields and save yourself lots of work.
one of my mates has a 454 powered 75 series and takes care with his axle studs, he has no probs and has snapped axles but the studs are fine. i put 10mm unbrako's in mine, no probs what so ever and a very easy job.
cv's, well year they're not the strongest but i don't do any more than my mates with similar set up's to mine but on gq's. anyway longfields sort it anyway. too easy.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

todsmods wrote:sick of braking cv's, dont need to run wheel spaces and wont have drama's with rear hub studs braking
wheel spacers?

they are around the same width :roll:


swap it in and dont complain when you wreck your C200 :lol:
hands and mums dont count!!!
Top
Posts: 314
Joined: Thu Aug 16, 2007 6:29 pm
Location: RANDWICK

75

Post by teambullet »

Mate i had prob 8cvs left after i sold my hilux in early 06, got a 75 locked it running 37s, did 6 cvs in as many months. Sometimes i thought i was driving conservatevly too.
Anyway a month back got the longfeild axles and hub gears, done about 8 hard trips, even drove the hills where i had done cvs, no problems anymore, they really will sort that problem.
As far as spacers flip the rims, got them done and now its like im running them anyway.
DONT go nissan.
Denny
R.I.P SILVER BULLET.
TOW RIG D4D 2011 LUX ON 33s. COMP RIG 95 SIGLE CAB LUX
SPONSORS EASTCOAST 4WD EASTSIDE AUTO KAR PRO TYRE AND AUTO
TECH ENGINEERING
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests