Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
fuel pump / filter setup
Moderators: toaddog, TWISTY, V8Patrol, Moderators
fuel pump / filter setup
This is the setup I am planning on using for my motor swap (40 sereis 2F > EFI Lexus 1UZ V8). Can anyone see any problems with this? Will i need a low pressure lift pump between the tank and the filter?
went there dressed up, came back messed up
81 FJ40 hardtop - Lexus 1UZ-FE conversion underway
81 FJ40 hardtop - Lexus 1UZ-FE conversion underway
Mate i would do it in this order:
fuel tank>plastic low pressure fuel filter>low pressure lift pump>surge tank>high pressure EFI pump>EFI fuel filter>fuel rail.
> = direction of fuel flow
The return line from the fuel rail goes back to the surge tank and you also need an overflow line off the surge tank back to your fuel tank. I hope that makes sense!
Cheers,
Bill.
fuel tank>plastic low pressure fuel filter>low pressure lift pump>surge tank>high pressure EFI pump>EFI fuel filter>fuel rail.
> = direction of fuel flow
The return line from the fuel rail goes back to the surge tank and you also need an overflow line off the surge tank back to your fuel tank. I hope that makes sense!
Cheers,
Bill.
Chunks is right. EFI pumps hate pulling fuel, the only want to push it. You will need a surge tank (or a factory tank with a swimmer pump in it baffled for EFI use) if you don't want to have hassles with fuel delivery or lean outs.
Personally, I prefer the factory efi tank option as someone has already done all the engineering for you, there's the minimum of connections and fittings, and they're neat and quiet.
Steve.
Personally, I prefer the factory efi tank option as someone has already done all the engineering for you, there's the minimum of connections and fittings, and they're neat and quiet.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 116 guests