Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

what to do to get a 3F moving.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 86
Joined: Sun Nov 23, 2003 7:21 pm
Location: melbourne

what to do to get a 3F moving.

Post by Gibonator »

Recently i thought i was making a big step up power wise. Upgraded from a 22r powered bundera with 33's to a 3F middy with 31's for towing duties etc..........

Obviously, the 22r will sit on 5 grand all day and bounce the needle off the tacho with no worries in the mud hours on end. :lol: :twisted:

The 3f though being a long stroke tractor thing seems not to be happy as soon as it hits 3 grand. the cruiser goes alot slower than the bundera which i would have expected to be the opposite.

What should i do to make it perform a bit more if possible.
How much revs can you give it to be safe. Have read about electronic ignition and extractors, it is on gas and has been rebuilt 200k ago. What about chucking a new different grind cam in it? not interested in a v8 conversion,
where in vic can you recomend.
FJ 73, army green ,snorkel, high mount, dual bats,draws,
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

get used to it, a 3F will never be quick, but it will just keep pulling. If your really keen for some more power, shave head, snorkel, good exhaust and a good tune up will keep it at its best. With mine on road its happiest to shift around 2500-3000rpm, out bush I can push it too 4000rpm sometimes just above if i have too.
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

Pull it out and stick sumfink else in :armsup:
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 309
Joined: Sun Apr 24, 2005 8:20 pm

Post by Thommo 73 »

second putting some thing else in. you'll never rid yourself of the carby problems!
i put a 1uz in mine and smile every time i drive it..! :twisted:
1uzed and no home for it
Posts: 86
Joined: Sun Nov 23, 2003 7:21 pm
Location: melbourne

driving it

Post by Gibonator »

im not really interest in shaving head etc, maybe just decent exhaust but problem so far is that my has long range tank, the exhaust runs out side... if i put extractors they will probably have to double back then out side or over the other side.

what about elec ignition has to be someone who has tried it, me rig came with 3 sets of spare points so its sorta telling me some thing!

V8 i have the kit up me back yard cause i was going to bung it in me bundy. But i think chevs are old hat.
FJ 73, army green ,snorkel, high mount, dual bats,draws,
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

The only way to make the 3f go quick is sit it on a tralier behind a 4.5 cruiser :D
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

mate all you can really do if your not willing to open it up is keep it in an optimal state of tune, ie valve clearances, points and plug gaps, timing etc

cheers

P.S chev will probably give you same economy as a 3F just go WAY harder
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

A big hill gets them going well, the steeper the better...there used to be a turbo system you could buy for them....bruum bruum
Posts: 1
Joined: Fri Jan 11, 2008 3:27 am
Location: Perth

Post by mad_as_hec »

Just my personal experience: FJ73, 38" michelins; 6.11 diff ratios; factory 4spd auto. 3F is a strangled slug from the factory.I have been running mine with no engine mods except extractors, finer filter and 2 1/4" exhaust using factory diesel (low restriction) muffler for about 12 years. That system only cost me $600 fitted back then, not sure how much now. Not much change to the torque, but has turned it into a revver. Likes to sit on 5-6000 all day in the dunes. Suits the lower diff ratios perfectly. And because of the factory 30% overdrive 4spd auto with lockup convertor it sits at 2200 rpm @100kph with the 38'ers or 2500 rpm with the 35" road tyres. My wife likes to smoke it up in front of young guys in their V8 Commodes. :oops: Hope this helps a little with your decision.
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

mad_as_hec wrote:My wife likes to smoke it up in front of young guys in their V8 Commodes. .
Pics or ban :D
xxxx wrote:
:bad-words: :snipersmile:
Posts: 108
Joined: Sat May 05, 2007 8:06 pm
Location: Beaconsfield/Vic

3f

Post by Cruza62 »

I had a 3f in my 62 now got a 12ht, the 3f was based on some buick thing i think ? I had the carby rebuilt oversize, an electronic ignition, some special leads....blah blah = no difference, still crap....
Either way, even though a chev is a piece of poo engine, it is still newer technology than the 3f ! I'd steer towards a different engine if you want to keep the car, at the end of the day the 3f will always guzzle bucket loads of fuel for absolutely no return.
If you are going to change engines consider the 4.5 lt 80 engine 1fz... bullet proof as long as you buy one from '96 onwards, if it does'nt produce enough gogo then these engines can easily be turbo'd and produce snotloads of gogo.
Ben
62 was Petrol, now 12ht ! Body lift, lockers, spring lift, reverse offset rocrawler...? rims, NO RUST, some more stufffff....
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests