Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Anyone on here have a TD42 with an ATX turbo ???

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
User avatar
Hof
Posts: 372
Joined: Tue Mar 27, 2007 10:13 pm
Location: Perth

Anyone on here have a TD42 with an ATX turbo ???

Post by Hof »

Hi all,

If anyone does can they please do me a favour.. I would just like to know where on these kits they take the oil feed/return and water feed/return..

I have an idea for other kits I am just curious about this one..

Thanks for your help..

Cheers,

Hof
Top
Posts: 287
Joined: Sun May 01, 2005 2:33 pm
Location: Sydney

Post by michael a »

oil feed is from the oilfilter housing water feed from top hose. oil dump to sump and water dump to rear of block on mine.
get under it
Top
Posts: 9
Joined: Wed Jan 02, 2008 9:11 pm
Location: rowville

Post by mix4x4n »

my oil feed goes into the side of the block in between the passengers side engine mount all the others are the same as michael a's.ive also seen people put a T piece on the oil line for the vacuum pump on the back of the alternator .
Top
User avatar
Hof
Posts: 372
Joined: Tue Mar 27, 2007 10:13 pm
Location: Perth

Post by Hof »

Thanks heaps for that.. Much appreciated..

Just one more question.. Can you be a bit more specific with the water return into the engine block.. Where exactly does it go??

Cheers..

Hof
Top
Posts: 9
Joined: Wed Jan 02, 2008 9:11 pm
Location: rowville

Post by mix4x4n »

on the passenger side at the back of the block (near the bellhousing) there should be a provision to plumb up the water return its near the little alloy thingy(dont know what its called sorry :oops: )
Top
Posts: 287
Joined: Sun May 01, 2005 2:33 pm
Location: Sydney

Post by michael a »

Sames there is a bung or a welsh plug there.
get under it
Top
User avatar
Hof
Posts: 372
Joined: Tue Mar 27, 2007 10:13 pm
Location: Perth

Post by Hof »

All good got it sorted today.. Had an interesting result when I undid the plug, radiator fluid everywhere.. Now before you say it, I did drain the system as best I could from radiator hoses but it still dumped a fair bit from the block..

O well its all fun :D
Top
Posts: 527
Joined: Fri Apr 23, 2004 5:43 am
Location: Auckland, NZ

Post by GQ TROL »

Hof wrote:All good got it sorted today.. Had an interesting result when I undid the plug, radiator fluid everywhere.. Now before you say it, I did drain the system as best I could from radiator hoses but it still dumped a fair bit from the block..

O well its all fun :D
Thats because its the block coolant drain plug. Draining coolant from rad houses is only about 4litres, but the block plug throws the other 8 or 9 litres on the ground.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests