Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

05 SAS HILUX

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 317
Joined: Sun Jul 17, 2005 8:08 pm
Location: western australia

Post by crack »

theres no pics?? :cry:
If all else fails, use a bigger hammer

hilux- locked lifted and turboed
Top
Posts: 53
Joined: Thu Feb 02, 2006 1:16 pm
Location: Central Coast

Post by Pipes »

Sorry lads I haven't got any pics to post. However the hilux will be in octobers 4wd monthly & a pic is already in septembers 4wd monthly. It's on the last page advertising for next month. So check it out. I will take some pics when I go 4bying sunday n post them. :)
Hot on the left'
Cold on the right
Turds go down hill
& pay day is thursday.
Top
Posts: 109
Joined: Sun May 22, 2005 1:56 am
Contact:
Contact alchemist

Post by alchemist »

Pipes,

So can you please enlighten me as to what front diff you have got fitted? and what you have done?

I assume an 80 series front diff, flipped?

Have been real keen on getting it done myself.

Cheers
Dave
06 Hilux SR5 D4D
- www.newhilux.net
Top
Posts: 75
Joined: Sun Aug 08, 2004 11:46 pm
Location: Perth

Post by tuffer_2.4 »

post dig
any recent up close pics im about to start this my self also more details about specific model parts used
Top
Posts: 109
Joined: Sun May 22, 2005 1:56 am
Contact:
Contact alchemist

Post by alchemist »

tuffer_2.4 wrote:post dig
any recent up close pics im about to start this my self also more details about specific model parts used
You decided to keep it now?

Is that why you were trying to sell, because of the IFS?
06 Hilux SR5 D4D
- www.newhilux.net
Top
Posts: 75
Joined: Sun Aug 08, 2004 11:46 pm
Location: Perth

Post by tuffer_2.4 »

i was going to sell and get a tray back ute but decided to keep and modd more i like it more than the tray backs any way. Just going to sas it now then ill be happy
Top
Posts: 363
Joined: Mon Apr 17, 2006 8:21 pm
Location: melbourne

Post by mmaaxx »

any apics of this hilux? Ive got an 07 running 3inch lift and 33's and will be looking into some gears this year and trying to squeeze "skinnier" 35's on it too. more likely something like 34/10.5x16 swamper LTB's for offroading but would like to see pics of this one.

is this the bronze coloured one that was in 4x4 monthly ages ago.the extra cab chassis?

I know in the states they are managing to run the Taco's with 3inch lift and 35's. but you need the perfect offset wheel, trim the body mount and some plastic.
Top
Posts: 53
Joined: Thu Feb 02, 2006 1:16 pm
Location: Central Coast

Post by Pipes »

mmaaxx wrote:any apics of this hilux? Ive got an 07 running 3inch lift and 33's and will be looking into some gears this year and trying to squeeze "skinnier" 35's on it too. more likely something like 34/10.5x16 swamper LTB's for offroading but would like to see pics of this one.

is this the bronze coloured one that was in 4x4 monthly ages ago.the extra cab chassis?

I know in the states they are managing to run the Taco's with 3inch lift and 35's. but you need the perfect offset wheel, trim the body mount and some plastic.
I think I might be able to post a pic up if I remember how. :?
Hot on the left'
Cold on the right
Turds go down hill
& pay day is thursday.
Top
Posts: 53
Joined: Thu Feb 02, 2006 1:16 pm
Location: Central Coast

Post by Pipes »

Image

Image
Hot on the left'
Cold on the right
Turds go down hill
& pay day is thursday.
Top
Posts: 363
Joined: Mon Apr 17, 2006 8:21 pm
Location: melbourne

Post by mmaaxx »

does anybody here know what that front conversion ended up costing him?
Top
Posts: 53
Joined: Thu Feb 02, 2006 1:16 pm
Location: Central Coast

Post by Pipes »

OVERKILL ENG wrote:Okay I will answer some of the questions.

We did the work for the owner its not our truck.

It runs full 80 series front end including radius arms,steering box,coil towers panhard.It also runs a Dobbin Engineering Crosslink very similar to Chads.(professor).
Cost wise as its not totally finished so its hard to be exact but it will be around the $10000 mark.
When it is finished we will post up some pics of it in action.
SAM
Image
Hot on the left'
Cold on the right
Turds go down hill
& pay day is thursday.
Top
Posts: 363
Joined: Mon Apr 17, 2006 8:21 pm
Location: melbourne

Post by mmaaxx »

Im soooo jealous of that beast.......guess i just have to put up with my IFS....for now
Top
Posts: 267
Joined: Fri Nov 05, 2004 6:42 pm
Location: central coast nsw

Post by dirty harry »

i see you have coils in the rear now :cool:
if you have the guts....follow my ruts!
Top
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Contact:
Contact evanstaniland

Post by evanstaniland »

dirty harry wrote:i see you have coils in the rear now :cool:
and the x link front and rear!!

Evan
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest