Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Pajero 3000 -90 only runs on 5 cylinders

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 8
Joined: Thu Sep 27, 2007 8:50 pm
Location: Sweden

Pajero 3000 -90 only runs on 5 cylinders

Post by bertilson »

Can anyone help me??

I don't get any ignition on the 3:rd cylinder.

I have bougt new Sparkplugs. Sparkplug-cables, distribute cap. and distributer.


I have skifted sparkplugs with the 6:th cylinder. The fault remaines on the 3:th cylinder.


then i skifted nozzels with the 6:th cylinder. The fault still remaines on the 3:th cylinder.

I have mesured the voltage on the nozzle cable and gets ~2 volt when the engine i running. I get the same value on the 5:th cylinder.

And the sparkplug gets a littlebit wet but don't smell gasoline.

What should i Do?
Top
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

By Nozzle's, you mean the Injectors? And the voltage going into all the injectors is the same......?


Try a Compression check?
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel

2008-2009-2010-2011 Pavlova in the shed.
Top
Posts: 8
Joined: Thu Sep 27, 2007 8:50 pm
Location: Sweden

Post by bertilson »

Yes i mean Injectors :oops:

The problem come and goes. Can i really be the compression then??
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests