does anyone around here run 35/11.5/15 simex et2s on a tj?
i need some info about in what size rim do you run those et2's and on what lift size etc..plus pics?
thanks in advance!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
et2s 35/11.5/15 need info plus pics
Moderator: GUtripper
I imagine Simex will spec an 8" rim for these. To avoid rubbing probably need 3.75 to 4" backspacing as well. That sort of back spacing is what most people with 12.5" wide tyres run and Simex are pretty wide with the lugs.
35s generally need about 4.5" of combined coil/body lift on a TJ unless you do a high hood / virtual lift.
I ran Simex ET 32x9.5s (pretty much a 33) and also 33 BFG ATs with just a 3" coil lift. Both on 7" rims with 3.75" backspacing.
Not sure if any regular Jeepers on OL are running Simex. Ausjeepoffroad would be a good place to ask.
35s generally need about 4.5" of combined coil/body lift on a TJ unless you do a high hood / virtual lift.
I ran Simex ET 32x9.5s (pretty much a 33) and also 33 BFG ATs with just a 3" coil lift. Both on 7" rims with 3.75" backspacing.
Not sure if any regular Jeepers on OL are running Simex. Ausjeepoffroad would be a good place to ask.
Who is online
Users browsing this forum: No registered users and 3 guests