Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Diff suggestions plz
Moderator: Micka
On the bright side, you learn much more about diffs, axles and tail shafts when you own a Rover. What tread do you have on your tyres, I think that plays a part. You have done a very good job with that diff by the way.rover_owner wrote:Hey Cloughy hold that thought, I'm still working on the missus for the extra cash I need mate.....
I thought you might like to see the result of to much right foot, steep incline and loose rocks....



We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
In the mean time you can put the front diff in the rear if you need to drive it.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Thats a waste of time just drive round on the front wheels ive done that for nearly a month and had no issues4WD Stuff wrote:In the mean time you can put the front diff in the rear if you need to drive it.



Also i have a pile of 10 spline centers in much the same shape as that and worse also some twisted axles tho no broken ones yet




Cheers
Chris
Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Chris
Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Yep, just drive on the front, get used to the broken centreslokka wrote:Thats a waste of time just drive round on the front wheels ive done that for nearly a month and had no issues4WD Stuff wrote:In the mean time you can put the front diff in the rear if you need to drive it.![]()
![]()
![]()
Also i have a pile of 10 spline centers in much the same shape as that and worse also some twisted axles tho no broken ones yet![]()
![]()
![]()

I had a pile............2 slabs worth in scrap

Wanted: Car trailer or beaver tail truck, let me know what you got
You did a good job of that one there, I had one similar to that years ago pre-maxi-drives that is.
Drivelines are the weak point of Land Rovers sadly, pity they couldn't get them right when first designing the Rangie
. One of the reasons why I think the Rangies always had smallish tyres on compared to the competition at the time is because of breakage
Trav
Drivelines are the weak point of Land Rovers sadly, pity they couldn't get them right when first designing the Rangie



Trav
Land Rover- The Collingwood of 4WD's!!!!
Hi again,
I've put another standard diff center in for now so I can get back out there
.
The tyres are 32" BFG A/Ts, and I'm still looking in to a possible axle change!!!!
I can understand some guys not liking the idea of fitting non Rover parts to their Rangie or Disco's, I would really like to stick to Rover axles but to be honest, I was really impressed (as were the guys I was out with, with their looked and lifted GQ, GU and Cruiser) with how capable and comfortable the Rangie was almost stock, but pretty disappointed when it busted the diff, and then to read so many story's telling the same tale
.
Just how much can you change on a Rover before people say "oh yeah but it's not really a Rover"?
Bigger tyres, different offset/diameter wheels, after-market lifted springs and long travel shocks, after-market body lifts, hacked body work, AFTER MARKET AXLE INTERNALS or after market diff locks????
The reason I was looking into the diff change in the first place is because I was offered a pair of complete, disc to disc, GQ Diffs/axles for the same price as I've just paid for a 10 spline diff center!!! As I said earlier in this thread I'm a fitter and turner, and some friends (whom are sheeties and welders) offered to help with the conversion.
I would love to be able to wave the Rover flag as I really lke the bloody thing (Oh, and did I mention I was a POM too!!!) but, no matter how much you love this brand or that brand there's always room for improvment, and to me 4wd'ing is about enjoying being out with friends and eliminating as many of my Rovers weak points as possible,
Sorry if I've gone off the original thread, and I hope Rangie Motivated has had some luck with his problem.
I've gone enough,
have fun getting dirty,
Laters,
Jim...
I've put another standard diff center in for now so I can get back out there

The tyres are 32" BFG A/Ts, and I'm still looking in to a possible axle change!!!!

I can understand some guys not liking the idea of fitting non Rover parts to their Rangie or Disco's, I would really like to stick to Rover axles but to be honest, I was really impressed (as were the guys I was out with, with their looked and lifted GQ, GU and Cruiser) with how capable and comfortable the Rangie was almost stock, but pretty disappointed when it busted the diff, and then to read so many story's telling the same tale

Just how much can you change on a Rover before people say "oh yeah but it's not really a Rover"?

Bigger tyres, different offset/diameter wheels, after-market lifted springs and long travel shocks, after-market body lifts, hacked body work, AFTER MARKET AXLE INTERNALS or after market diff locks????

The reason I was looking into the diff change in the first place is because I was offered a pair of complete, disc to disc, GQ Diffs/axles for the same price as I've just paid for a 10 spline diff center!!! As I said earlier in this thread I'm a fitter and turner, and some friends (whom are sheeties and welders) offered to help with the conversion.
I would love to be able to wave the Rover flag as I really lke the bloody thing (Oh, and did I mention I was a POM too!!!) but, no matter how much you love this brand or that brand there's always room for improvment, and to me 4wd'ing is about enjoying being out with friends and eliminating as many of my Rovers weak points as possible,
Sorry if I've gone off the original thread, and I hope Rangie Motivated has had some luck with his problem.
I've gone enough,

have fun getting dirty,

Laters,
Jim...
'86 Rangie +2" lift 32" BFG's
Mum used to say
"If you can't say something nice
Shut the F#*k up !!!"
Mum used to say
"If you can't say something nice
Shut the F#*k up !!!"
My vote is for the Toyota Hilux diff centre swap. You keep as much as possible as Rangie and you keep your diff clearence and change to 4.1 or 4.3 ratios. Not cheap but there is no cheap solution.
I also vote for the 3.9 Litre EFI or bigger.
I would get a 2" lift, 650mm rear shocks instead of 555mm and tie in the rear coils so you can show off your flex. Put Cruiser shocks up front. Make yourself some sliders and other protective stuff so you don't beat up your Rangie.
The more you go off road the more you will enjoy it, the harder tracks you will try, the further you will put the right foot down and the the bigger tyres you will want. Pay the money now, do it right the 1st time and enjoy your Rangie because it is probably the most comfortable off roader with the best stock suspension package. You don't get bump steer. You get great power to the ground because of the supple A frame and close to level pretty long lower control arms.
Shane.
I also vote for the 3.9 Litre EFI or bigger.
I would get a 2" lift, 650mm rear shocks instead of 555mm and tie in the rear coils so you can show off your flex. Put Cruiser shocks up front. Make yourself some sliders and other protective stuff so you don't beat up your Rangie.
The more you go off road the more you will enjoy it, the harder tracks you will try, the further you will put the right foot down and the the bigger tyres you will want. Pay the money now, do it right the 1st time and enjoy your Rangie because it is probably the most comfortable off roader with the best stock suspension package. You don't get bump steer. You get great power to the ground because of the supple A frame and close to level pretty long lower control arms.
Shane.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
and in 1970, what was the competion for a range rover?????Aquarangie wrote:You did a good job of that one there, I had one similar to that years ago pre-maxi-drives that is.
Drivelines are the weak point of Land Rovers sadly, pity they couldn't get them right when first designing the Rangie. One of the reasons why I think the Rangies always had smallish tyres on compared to the competition at the time is because of breakage
![]()
![]()
Trav
what eles had cols all round, discs all round, constant 4wd, etc etc
they didnt have much power, but used it well. they were/are a luxury car
serg
Hey cloughy,
I paid $200 for the diff center
, and a friend of mine says he has a spare set of GQ pootrol diffs I can have for around $200!!!
That's why I was interested to find out how bad the vibes are when using the rear one, and if a double cardon has been used by anyone who has done the conversion??? 
I paid $200 for the diff center



'86 Rangie +2" lift 32" BFG's
Mum used to say
"If you can't say something nice
Shut the F#*k up !!!"
Mum used to say
"If you can't say something nice
Shut the F#*k up !!!"
Buy them diff'srover_owner wrote:Hey cloughy,
I paid $200 for the diff center, and a friend of mine says he has a spare set of GQ pootrol diffs I can have for around $200!!!
That's why I was interested to find out how bad the vibes are when using the rear one, and if a double cardon has been used by anyone who has done the conversion???

You need to get the flange angle right, between, transfer output and diff yolk, But for $200 what's a few vibes

Wanted: Car trailer or beaver tail truck, let me know what you got
That's not the point and I do agree with what you have said, but it's a sad fact that stock LR axles ARE CRAP end of story.uninformed wrote:and in 1970, what was the competion for a range rover?????Aquarangie wrote:You did a good job of that one there, I had one similar to that years ago pre-maxi-drives that is.
Drivelines are the weak point of Land Rovers sadly, pity they couldn't get them right when first designing the Rangie. One of the reasons why I think the Rangies always had smallish tyres on compared to the competition at the time is because of breakage
![]()
![]()
Trav
what eles had cols all round, discs all round, constant 4wd, etc etc
they didnt have much power, but used it well. they were/are a luxury car
serg
For there size, the 3.5 Rover V8 is a great engine as we all know, just pulling along a 2 tonne Rangie it could have been better, but like you said back then most 4WD engines were hopeless anyway

Trav
Land Rover- The Collingwood of 4WD's!!!!
cloughy wrote:Buy them diff'srover_owner wrote:Hey cloughy,
I paid $200 for the diff center, and a friend of mine says he has a spare set of GQ pootrol diffs I can have for around $200!!!
That's why I was interested to find out how bad the vibes are when using the rear one, and if a double cardon has been used by anyone who has done the conversion???
![]()
You need to get the flange angle right, between, transfer output and diff yolk, But for $200 what's a few vibes
Ah the vibes
BUGGER THAT! nothing worse going on a long trip (2 hours) and cruising on the highway with the arse end of the rangie shaking away. Finally ripped out the GQ rear and put in an 80 series diff.. No vibes now

Seriously don't recommend putting a GQ in rear of a rangie.. unless you plan to drive 99% offroad
Camo
PS Double Cardon won't fix.. I spent 700 bucks getting one made for mine.. if anything it made it worse!
1994 Range Rover Soft Dash, Rear ARB Locker, 33's, 2" body & Spring, custom bits
2004 Range Rover Diesel 20" wheels. My Black Beauty:-)
2004 Range Rover Diesel 20" wheels. My Black Beauty:-)
What is it about the GQ rear end that makes it vibe??
Shane
Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Who is online
Users browsing this forum: No registered users and 1 guest