Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

A "Handy" Hint from Coxy's Garage

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

A "Handy" Hint from Coxy's Garage

Post by coxy321 »

Not sure if this should be in 4x4 Tech or General Chit Chat, but as I personally think its car/4x4 related - here goes!

I've always had "issues" cleaning my hands/arms after working on cars/4x4's. The "bought" hand cleaners aren't really too flash for me (cause i've got really crap cracked skin from too much solvent years ago), the only one i found half decent was the WURTH stuff ($$$$$). A cheaper alternative i've found which i use ALL the time:

Laundry powder. Gives a nice warm fuzzy feeling, stings in your cuts, but does a damn good job. And for that extra bit of cleaning power, i spray on a good dose of that Preen pre-wash stain remover spray kinda stuff. That stain remover is awesome - feels very oily, but it cleans up a treat.

Give it a crack next time!

Cheers - Coxy
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Try wearing mechanics gloves. Not ideal in every situation but makes clean up a lot easier and saves about a pount of knuckle skin for me every year. :lol:
KRiS
Posts: 377
Joined: Mon Mar 20, 2006 5:52 pm
Location: Geelong

Post by tj81 »

Dynamo is the best hand cleaner around !
92 LWB Ford Maverick 4.2, Dual Fuel.

99 GU ST 4.2 Turbo Diesel, Non Intercooled, Tigerz11 w/synthetic, 35"' Bighorns, ARB Compressor, Snorkel.
Posts: 505
Joined: Wed Jan 25, 2006 9:19 am
Location: to the left of the post

Post by trains »

I found the best hand cleaner was the BP stuff, yellow, with nylon grit balls in it.
Can use with our without water.
pretty much tried everything else, thats the only stuff that dosent dry my hands out, and it cleans very well.

Trains
Save the Whales......Collect the whole set.


My Wife Can't Shear..............But You Should See Her Crutch !
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

My next door neighbour at my last house was a retired RAAF hydraulics fitter.
He said his hands were fine until he stopped dipping them in hydraulic fluid everyday when he retired.
He would get cracks so bad they would bleed!
His solution was lanolin smeared on his hands and surgical gloves before going to bed. He'd take the gloves off and wash his hands in water in the morning.
He did this every night for 3 months and his hands are now softer than his wifes, no cracks, no bleeding and most importantly for Bob no pain.
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Post by bj42turbo »

I have a box of "bend over for your examination" latex gloves for the oily stuff, hate the smell of diff oil on the skin, the wife dosn't much care for it it either

BJ
User avatar
stu
Posts: 913
Joined: Wed Jan 22, 2003 8:08 am
Location: brisbane

Post by stu »

bj42turbo wrote:I have a box of "bend over for your examination" latex gloves for the oily stuff, hate the smell of diff oil on the skin, the wife dosn't much care for it it either

BJ
same here.....the gloves i mean...i don't know your wife.
i don't need no stinking quote for my sig. line!
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

want33s wrote:He would get cracks so bad they would bleed!
Yup. When i was working in the industry thats what my hands were like. You know how sometimes on the news they show you shots of all the dried up dams etc. cause of the drought? Thats it. No much you can do except absolutely LOAD strong moisturiser onto it, and then i used to actually get sand paper when it dried up and rub back the dead skin.

My mate's father inlaw (real anal fussy fella, we reckon he's a pansie {drives a cruiser of course}) rubs this lanolin based hand cream onto his hands before and after getting dirty. Lets just say that he needs his hands smooth for reasons better not mentioned.

Anyway, my old man used to have a tin of this creamy looking stuff (old school orange tin, about 20 odd years back), it separated all the time so needed a good stir up before use, but that stuff was pretty porno. Apparently they stopped making it cause it caused cancer or something like that. Meh.

Coxy
Posts: 2311
Joined: Fri Sep 09, 2005 11:08 am
Location: Bendigo

Post by kirragc »

Ive got some stuff that they used to sell to Dairy men years ago thats got a bit of fine sand in it, works great and leaves your hands quite soft.
failing that washing powder is the next bet.

And if they go rock hard then lanolin before and after. Before because it kepps the grime out of your pores and nails
What, haven't you ever done lines of International Roast off a hookers back with $100 notes?
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

I've got this stuff simply called "Phil" it's imported from the state's and is the best shite known to man.

I used to wash my hand 5+ times a day when working on pushi's and loved it.

you need a minimal amount, it's essentially the acrylic sawdust stuff that you can buy with a lil organic soap and moisturiser all in one, it's absoultely magic... foolsp33d will know what I'm on about.

during a strip down of a patrol (rebuild 4.2td and both diffs) not once at the end of the day did I have to wash my hands more than once!!!
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

I've found dishwashing detergent works well for cleaning up and is probably kinder on your skin! :)
David
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Post by Goatse.AJ »

I use the blue "Nitrile" gloves. Safeway sells 'em for $2.95 a pack of 24 and they're pretty resistant to oil, etc. I only used about 6 or 8 of them in total last week when doing a gearbox swap/split from tranny case and swap it/fit extractors and weld exhaust, etc., etc. job last week. The latex gloves a better than nothing but generally suck rrr's.

Best thing I find to get grease off ya hands is laundry pre-wash stain remover.
bru21 wrote:What happens in goat, stays in goat!
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

the ONLY stuff that has always worked for me, is TRUE GRIT, made by eziclean products. http://www.ezicleanproducts.com.au/products.htm mind you, the stuff i have is in a totaly different container... but im told that is actualy there website...

the stuff itself is yellow with little gritty bits all thru it, works a treat, every time. even got sikaflex and expandafoam off (albeit after 15 mins and rubbing bloody hard)
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

I have only used it a couple of times but when i have it has worked great. We use barrier cream at work. You put it on b4 you get dirty and when its tim to clean up u just rinse under plain water and your clean.
Anyone else use barrier cream?
GQII Patrol YAY!!
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

NIPPLE GREASE

if you have cracked skin, go to a farm supply and buy some udder cream, dairy farmers use it on the cows if they get dry and cracked, it comes in a 1KG tub it's lanolin based (shearers have always had the softest hands from the lanolin in the wool) and is as cheap as chips, we all call it "NIPPLE GREASE" it works a treat :armsup:
Peter.
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Posts: 220
Joined: Fri Nov 29, 2002 11:13 pm
Location: Canberra

Post by mattc »

If your hands aren't too greasy then baby wipes are great. Use too many if your are absolutley covered in dirt but easy to keep in the car.
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

Prepsol 1st then just any handwash!
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Post by Mark2 »

The cheap sorboline creme from the supermarket or chemist is the best moisturiser I've come across...................
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Normal soap, but you have use the wifes tutu type body scrubbing pom pom thingy that hangs in the shower.

Just don't let her know she's body scrubbing with about 50% body scrub and 50% diff oil :D

It gets the crud off though.

Cheers
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

I would like to know when the new "Coxy's tip from the shed" coming
Posts: 412
Joined: Fri Jul 14, 2006 6:03 pm
Location: brisbane

Post by rvh96 »

i can not beleave some of you blokes what are you girls or what ,soft clean hands, gloves, next you'll be getting manicures just drink a glass of concrete and harden the f@#k up
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

rvh96 wrote:i can not beleave some of you blokes what are you girls or what ,soft clean hands, gloves, next you'll be getting manicures just drink a glass of concrete and harden the f@#k up
Amen

i use can degreaser first then wash with soap. If no degreaser left use washing powder or dish washing liquid then soap.
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

I too use laundry powder...

- trick -....

I use a plastic box - one of those old laundry powder plastic boxes....

pour some laundry powder in it... and put some water in it, not heaps.. just enough to make it look mouldy.

and then just swab your hands in it and grab some and start scrubbing away ;)
custom bar work, 4x4 parts, trailers, anything out of steel/alloy :D
Posts: 4792
Joined: Sun Nov 21, 2004 9:05 pm
Location: Watching out for stray buses

Post by Brendan-s »

I keep a tin of that Aussie Export degreaser on top of the show all the time, it's awesome shit. Its the best for lazy pricks as all you do is spray and it literally sprays the dirtiest diff oil/axle grease right off. Sure lets you know where the cuts and scrapes are though :rofl: :rofl:
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

i buy this cooking oil stuff of a bloke ( good description eh ) that is apparantly a bi product of bio diesel. it is really good for cleaning parts to, feels like grease when you use it.

NICK
TECH SCREW GURU
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

P00fs whats up with solvol - even girly liquid solvol?
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Posts: 2298
Joined: Sat Jun 11, 2005 11:26 pm
Location: nsw maitland

Post by cooter »

i have been in the mechanic trade for about 10 years working on trucks trains and tractors by far the best thing is a stiff bristled srubbing brush and normal soap for your hands and ya missus's loofa thingo with sunlight soap for the rest of ya and pumice stone crap for the cracked skin followed by this hemp stuff i have it is half hemp seed oil and lanolin it is designed for dry cracked heels but works awsome on ya hands

and no i am not soft or a pansy but i find that i get more play with the missus if my hands arent all rough and cracked and also i got sick of my skin cracking around my fingernails that bad that they used to bleed and sting i used to be able to clench a fist tight and tear my skin around my knuckles

lanotech grease will fix very dry skin but stinks bbbbad
http://www.4wdaction.com.au/shed/index.php?id=1097&im=1
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

Bad JuJu wrote:P00fs
:D
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

Daisy wrote:I too use laundry powder...

- trick -....

I use a plastic box - one of those old laundry powder plastic boxes....

pour some laundry powder in it... and put some water in it, not heaps.. just enough to make it look mouldy.

and then just swab your hands in it and grab some and start scrubbing away ;)

x2
I use a scotch bright scourer for the stubborn stuff

The citrus based cleaners work well too
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Re: A "Handy" Hint from Coxy's Garage

Post by V8Patrol »

coxy321 wrote:i've got really crap cracked skin from too much solvent years ago), the only one i found half decent was the WURTH stuff ($$$$$).


:armsup:

WURTH


:armsup:

Like you, my hands WERE all cracked and had massive splits ( trenches ) in the hardened skin....

Like you, I USED to use laundry powder.....
along with thinners/petrol/HandyAndy/Ammonia/SprayNwipe/ & a whole host of other nasty cleaners ....



Like you, I found the WURTH stuff worked the best but it was WORTH too much ( pun intended )







2 years later of SOLE use of the WURTH product & ........









its WURTH every damn cent







Even the wife doesnt complain about the hard skin any more when placed on / in those soft delicate places
;)
Sure it aint cheap, but my first bottle lasted 18 months, the 2nd bottle was the same price as what the first one cost me.
I've even got the boss to supply it at the w/shop now :D .... so far the bottle has had 3/4's used up in 6 months, its cheaper in the long run than other cleaners we've had in the past.


I wont use anything but WURTH
:D
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Post Reply

Who is online

Users browsing this forum: No registered users and 126 guests