Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Wheel Nuts for mag wheels
Moderators: toaddog, Elmo, DUDELUX
Wheel Nuts for mag wheels
Please see wanted section
go to your local beaurepairs or bob jayne tmarts. they should have a few catalouges to look at. I bought ROH wheel nuts for the aftermarket alloys on my 80series because they came in lots of different lengths and had a really good large surface area on the tapered part.
I lost a front wheel at about 80kms/hr
and wanted something decent to replace lost/dodgey wheel nuts.
I needed long wheel nuts, with a small hex size because of the design of my rims. The ROH ones I got had a small hex size to suit landcruiser thread and still had a full size tapered end. I think I bought 30 nuts (I wanted some spares) for about $100
I lost a front wheel at about 80kms/hr
and wanted something decent to replace lost/dodgey wheel nuts. I needed long wheel nuts, with a small hex size because of the design of my rims. The ROH ones I got had a small hex size to suit landcruiser thread and still had a full size tapered end. I think I bought 30 nuts (I wanted some spares) for about $100
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Who is online
Users browsing this forum: No registered users and 1 guest