Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
As above.. Just put a gauge in and at about 10psi it makes a vibrating whistle sound.. Can tell if its actually waste gating at 10 psi or if its leaking..
Prob a stupid question but is this normal??
It came with a little restrictor plug that fitted into the pipe, which I used, should I remove that maybe??
Hof wrote:Like I said I fitted the restrictor that came with it.. I was asking if I should remove it..
Might try it in the morning and see how it goes..
I had the same prob with a new boost gauge. didnt stop doing it until I restricted the line to 1mm diameter hole, Still vibrates occasionally if Im accelerating hard than back off the throttle fully.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
ive heard - not tested! that you can put a flow limiter in from a fish tank - the adjustable wheel kind and turn it down till it makes no noise - also doesnt affect the reading.
