Hey guys
lookin at a 1987 model sierra ute, want to know it all the specs are the same as a normal sierra...and that all available mods will fit it. would be handy to find out now and not later thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
suzi ute
Yep all the mechanical specs are the same. The chassis on the trayback is different - the fuel tank is behind the cab (same tank as a normal sierra, just a different filler location) so a spare tyre can go under the tray behind the rear axle.
They normally have the base model sierra dash which means a plastic dash like any other narrow track but no tachometer.
The seats are fixed in the utes (no adjustment at all) and they're terrible. the floor is slightly different to a full body car - the passenger side seat mount is the same as the driver's side, not flat on the floor like the tilting seats.
they're the only real differences. All parts are interchangeable.
Steve.
They normally have the base model sierra dash which means a plastic dash like any other narrow track but no tachometer.
The seats are fixed in the utes (no adjustment at all) and they're terrible. the floor is slightly different to a full body car - the passenger side seat mount is the same as the driver's side, not flat on the floor like the tilting seats.
they're the only real differences. All parts are interchangeable.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Why? same cylinder, same brakes, nice consistent pedal even when stalled/engine off. Yes pedal effort is higher but feel and modulation is superior too.scooby_74 wrote:only bad part is no brake booster.
Never had unboosted brakes before my 1.0 and I'm in no hurry to fit a booster.
Just my 2C.
Out of interest, the unboosted 1.0 brakes have a very similar feel (wen adjusted up) to the Brembo's in my STi. Yes. te Brembo's are massively more powerful etc, but the pedal feel is very similar.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
They just have a surprisingly hard pedal for a road car. Wouldn't mind the same Bosch antilock in the 1.0 as I have in the STi - It's very, very good.
Like I sad, I like the unboosted feel. It might not be everyone's preferance though, but booster or not, braking power is the same, only the pedal feel is affected.
Steve.
Like I sad, I like the unboosted feel. It might not be everyone's preferance though, but booster or not, braking power is the same, only the pedal feel is affected.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 10 guests