Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

looking at claws... just how good are they?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

Image
This is the pic of the Khumo mud terrains. My brother inlaw has them on his Hilux. He made it up steep slippery smooth rock 1st go with 31" Khumo's and a front locker.
It took me 3 attempts with 33" MTZ's and lockers front and rear in an 80 Series.

The extra weight of the Cruiser and a slightly different line may have played a part.

The Khumos have lasted a long time on the road, they are noisy but grip remarkably well in all conditions off road and do fine for on road.

Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Post by CWBYUP »

cloughy wrote: How you say....shithouse :D
Then what do you reckon would be good on a GQ LWB Wagon as an allround tyre ?

Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Posts: 627
Joined: Sun Mar 27, 2005 7:51 pm
Location: Sydney

Post by guzzla »

Mickey Thompson and Coopers are made in the same factory.

That is why you wont see them both being sold in the same shop as its a conflict of interest.

The Mickeys radials use a 2 ply side wall using 1500 denier material while BFGs us 2 x1000 denier. That make the Mickey T side wall 30% tougher than the BFG equivelent. Of course if you hit that stake in the ground at the right angle and speed chances are even your toughest tire will cop some damage.

Like any tyre if you dont lower the pressure to suit the vehicle and conditions then of course it will be crap. Likewise if you run them on the incorrect rim size. I know a few peolpe who have rolled 35s off a 10in wide rim but never had a drama with 8in wide rims.
IF IT MOVES, SHOOT IT
IF IT DOESNT, CUT IT DOWN
IF ITS GREEN, PISS ON IT
User avatar
Ben
Posts: 4434
Joined: Thu Nov 28, 2002 3:25 pm
Location: Melbourne

Post by Ben »

I've been running a set of 33s for a while now, before that it was ProComp MTs and then BFG MTs.

The BFGs where a pile of shit compared to the ProComp MTs, which were far superior in the wet (factory siped)...and the Claws own the ProComps by miles.

IMHO they're much, much better in the wet that BFGs (not that it's saying much) and the same if not better than the PC (which I must admit is surprising). But offroad is where they really shine, especially on the Wrangler, drop them to 15 and they're sweet and on sand I've had them at 10 with no problem at all.

Love em, my only issue is they're not wearing out fast enough and I want 35s!
Apparently people think I'm too patronising (that means I treat them like they’re stupid).
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

I run 37x13.5r15 Bias Ply calws...

love them!

nuf said...

To the haters - :finger:
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

cloughy wrote:
CWBYUP wrote:
tna racing wrote: :armsup:

another usless post by tna :roll:

Cloughy, on road driveablity how you would you rate the Simex's ?

Nick
How you say....shithouse :D


the 36x12.5's are heaps better then the old mould 35x10.5's.
Posts: 4607
Joined: Sun Oct 22, 2006 8:11 pm
Location: yallourn north,victoria

Post by tna racing »

CWBYUP wrote:
tna racing wrote: :armsup:

another usless post by tna :roll:

Cloughy, on road driveablity how you would you rate the Simex's ?

Nick
hey mate. only had a set for 12 months :roll: :roll: stfu
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

guzzla wrote:Mickey Thompson and Coopers are made in the same factory.

That is why you wont see them both being sold in the same shop as its a conflict of interest.
4x4 shop round the corner from my house (one of the bigger ones on the coast) that i buy all my little bits & pieces from (and bought my first set of tyres from) sell only Mickeys & Coopers... :roll:

I agree with bogged on the 2 x sets of tyres, 1 for play, BUT, take it from me, swapping tyres constantly gets old pretty quick. Unless you have a good trolley jack & rattle gun.



Khany, I wouldnt be worrying so much about what type of tyres you buy mate, if your into the 4x4ing thing and think you will be for a while its all a learning curve. Determine the size/width/rim size you want, then determine how aggresive you want to go and buy em. If you make the mistake once, you won't make it again. If your THAT unhappy with them, an ad on here in the for sale section will see them gone pretty quick and you won't be too far out of pocket...

Every body has diferent opinions on tyres, the only way you'll find a set your happy with is buy trying different sets for yourself. To be honest I think putting posts up here is only for others opinions is only going to confuse you more..
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

Post by Spartacus »

can u still get claws over 37s?
heard they were discontinued :?
MULL
Posts: 148
Joined: Sun Dec 23, 2007 12:46 am
Location: mildura

Post by khany427 »

ok so now that all the shit slinging is over.... (i think?)

i do understand that it is all matter of personal taste/needs/likes etc

i was just after opinions as no one around here runs anything really aggresive, bout the most hardcore they get is my mates hilux with mongrels.
they are proving to be a really good tyre but im not willing to get a set as they dont come in the size i want and dont wanna risk getting a dodgy set of remoulds.

other mates have wrangler mtrs, federal couragias etc but they arent real good with the clay around here.

and i dont have the cash to run 2 sets of rims/tyres at the moment as my 45 is still getting built. no doubt i wll run 2 sets later down the track though!

i will also not run bfgs... ive had them before and the sidewalls are absolutly useless, ive staked everyone i had, and so have mates who have run them. thats just my experiance so has turned me right against them...

so how about these silverstone extremes people?
what have we experianced with them? how many kays, puncture/stake resistance ect...
also would i notice any differance between the 11.5s and 12.5s?? (they only come in 11.5 for people who dont know...)


AND NOW FOR SOME GOSSIP!!!!
got told by a tyre shop yesterday that (what they have been told) is simex are (or will be) discontinued, some other company have bought them out (and sime) and will only be keeping a couple of the sime line, so all thats available is whats left on the shelves around the country and in warehouses. thats just what they got told and they havent a any definite conformation as yet...
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

khany427 wrote:AND NOW FOR SOME GOSSIP!!!!
got told by a tyre shop yesterday that (what they have been told) is simex are (or will be) discontinued, some other company have bought them out (and sime) and will only be keeping a couple of the sime line, so all thats available is whats left on the shelves around the country and in warehouses. thats just what they got told and they havent a any definite conformation as yet...
This was discussed bout 9-12 mths ago too, dont remember the details, cbf searching for it, but it was dung if I remember that they will be discontinued.
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

I personally don't think there is a disadvantage of the 11.5" tyre. This has been talked about before concerning sand driving and it was surprising how well the skinnier tyres went when the air was let down.

I think there will be slightly less wandering so a bit better on road.
Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

mule75 wrote:
cloughy wrote:
CWBYUP wrote:
tna racing wrote: :armsup:

another usless post by tna :roll:

Cloughy, on road driveablity how you would you rate the Simex's ?

Nick
How you say....shithouse :D


the 36x12.5's are heaps better then the old mould 35x10.5's.
Very true, the 3 lugs are quite good, 2 lugs are crap on the road
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

Dee wrote:
guzzla wrote:Mickey Thompson and Coopers are made in the same factory.

That is why you wont see them both being sold in the same shop as its a conflict of interest.
4x4 shop round the corner from my house (one of the bigger ones on the coast) that i buy all my little bits & pieces from (and bought my first set of tyres from) sell only Mickeys & Coopers... :roll:
Double :roll:

Same as the local, If she ain't pedalling coopers it Mickey thompson
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

khany427 wrote: AND NOW FOR SOME GOSSIP!!!!
got told by a tyre shop yesterday that (what they have been told) is simex are (or will be) discontinued, some other company have bought them out (and sime) and will only be keeping a couple of the sime line, so all thats available is whats left on the shelves around the country and in warehouses. thats just what they got told and they havent a any definite conformation as yet...
This completely true!!!!!
Simex is what Sime call their tyres that are exported. ie the X stands for export. So they are going to just make one brand ie Sime. So the tyres will only be sold under one brand everywhere so you won't be buying Simex you will be buying Sime.
Marketing crap so in reality we won't ntice a difference except we'll be getting new stickers when it happens.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Post by mud4b »

i have ran claws from 31's to 35's all in radials on 2 different vehicles (mud4b - sierra and my last 80 series. they are great in my books, i got good k's out of them, the side slope was not a issue as long as you lowered pressures to suit. in the wet on the tar they are not so good when hard braking only, other than that i found they grip really well.

the sidewall was a little issue but as some have said if they have fixed that problem then i would buy another set. i currently run the 35's x 17 mtz's on my 80 and im not happy with them at all. the only thing they have over the claws is that they are slightly quieter on road, i feel they do not grip being on or offroad, they make the steering shimmy (yes i now know it is the tyres) and are just as slippery as the claws in the wet. im looking at going back to radial claws or some other tyre already.

cheers mark.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Post Reply

Who is online

Users browsing this forum: No registered users and 38 guests