Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Steering Probs in SPOA FJ40

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Steering Probs in SPOA FJ40

Post by DIRTY ROCK STAR »

Can anyone give me tips or a reason why?

when driving my FJ40 it seems to wobble at about 40-50kph but only sometimes and mostly after hitting a bump.
the steering wheel shakes badly. over or under this speed its not noticeable.
however it does wander a bit.
the diffs have been rotated.
is this a geometry problem or more something dead on it??

help will be much appreciated!
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

have the rims been balanced?
castor angles?
how have you mounted the drag links? hi steer, crossover steer?
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

When the diffs were rotated, were the knuckles cut and rotated aswell to maintain correct castor ?

And as 383FJ45 said, what steering setup are you running ?
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

well...

Post by DIRTY ROCK STAR »

you guys have been rather helpful.
but with the steering i honestly have no clue!
it has 75 series arms i think.
and i will check the knuckles as they have just been replaced.
i will sus that out.
had some issues wit ha dead diff so alot of shit got replaced and i now have fine spline diff and axle where before i had the older style apparently.
its all fucken dutch to me. i just like driving it, but would like to learn more!
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

sounds like castor angle problem to me. get a shop to stick it on an aligner, it might be correctable cheaply with wedges, if that won't screw your driveline angles too badly.
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

Shorty40 wrote:When the diffs were rotated



You need this done to keep the correct castor angles or it wont feel to good and may cause the probs !!!
----HillBilly Engineering----
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest