Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gearbox t/case oil level

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

gearbox t/case oil level

Post by Ruggers »

i think my oil seal separating the gearbox and t/case has let go. ive heard about a setup running between the two to level the oil out has anyone done this or explain to me how this is done thanks chris
Top
Posts: 943
Joined: Thu Jul 31, 2003 8:23 pm
Location: Darwin

Post by Tojo »

connect the two filler holes up with some tube. That way the oil level will equalise between the two. I was going to buy new filler plugs, drill holes in them and braze fittings on and buy some tube etc etc and then found out that my local parts shop sold the complete kit with hose and fittings. Can't remember the price.
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

i got one of them pipe thingys too. came with my gearbox tho.
Top
Posts: 240
Joined: Sun Jul 06, 2003 10:22 pm
Location: perth west australia

Post by roscoFJ73 »

Ruggers I got one fitted as a precaution from the PO.You can buy them from any good 4x4 shop well under $50 .Did you take the filler plug out of gearbox and the oil pissed out like it was overfilled?
1988 FJ 73 LX Lim Ed powered by 1HZ
1995 HZJ75 cab chassis
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests