Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4th and 5th gear sound the same

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 238
Joined: Sun May 07, 2006 7:37 pm
Location: Pakenham

4th and 5th gear sound the same

Post by seaeagle »

it doesnt seem any differant in rpm and it shudders on take off.....any ideas.....60 series 3f d/f

replaced tail shaft, put a limo diff in rear, old unis where really farked
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

it does change RPM but only like 200 RPM where the others do 600
turbos are nice but i'd rather be blown
Posts: 612
Joined: Wed Feb 11, 2004 6:50 pm
Location: Perth / Laverton

Post by Zeyphly »

How is the clutch?
03 turbo twin cab hilux + 85 xtra cab 253, Have i ever said i love lockers?
Posts: 579
Joined: Mon May 29, 2006 4:36 pm
Location: Melbourne

Post by bigcam »

don't take off in 4th and 5th gear???? try 1st.... or am i missing the point?
[quote="75 cruser"]we want more donkey[/quote]
Posts: 238
Joined: Sun May 07, 2006 7:37 pm
Location: Pakenham

Post by seaeagle »

bigcam wrote:don't take off in 4th and 5th gear???? try 1st.... or am i missing the point?
lol

my origanal thought was clutch, seems to to it more when its cold after a few hrs of driving its not as bad, there is a bit of play in the rear yoke , at the diff end
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

Is rpm in 5th consistent? The only way RPM could be the same in 4th and 5th at a given speed is clutch slippage.

That or Harry Potter...
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests