bull bar lift

[hmc_lux]

gday,
ive just done a 2" body lift on the 99 lux now i wanna lift the bull bar to suit the body and increase approach angle........ and as im not so confident in my welds id rather get a shop to do it but thats proving to be a hard ask....
so i was wondering if you guys could shed some light on what is involved or know of any places in perth that does that kind of stuff.....
cheers,
hayden

[v6hilux]

Ask the question here:

http://www.perth4x4.net/forum/

They will even know where Willetton is

Cheers!

[LFONZ]

that's the only way to do it i had to do the same. stick ya head under the bar, there might be enough pipe sticken thru so all ya have 2 do is cut it with gas and lift. or do the right thing and make it big!!!!
[img]

[carrot]

I've been there before! (Lifting a bull bar for a 2" lift, not Willetton!) It isn't a difficult job for someone with even very basic fabrication and welding skills... cut, lift, stick some metal in the gap, weld!

Having said that, I probably wouldn't have attempted a job like this myself a year ago!

[hmc_lux]

well found a place to lift the bull bar......COASTAL 4X4 in jandakot.
rang them n they said they dont do that stuff. but because i work away i got ma brother to take it down ther and they said yep no problem.........
any way its gettin done, all engineered for about 200 buks....
cheers guys