Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

15" rims on 80 series??

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 6
Joined: Wed Jan 16, 2008 8:31 pm
Location: Wodonga, Victoria

15" rims on 80 series??

Post by Hoggy »

I've got a near new set of Wrangler MTR's on 15"rims from my 75 series. I went to throw them on the 80 series but found that the rims hit the calipers on the rear!!

What can i do to utilise the tyres?

Different offset rims?
Top
Posts: 357
Joined: Fri Nov 07, 2003 3:30 am
Location: Mount Beauty

Post by Trusa »

Read the below thread. I'll see if I can dig up the pics.

http://www.outerlimits4x4.com/phpBB2/vi ... ht=caliper
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

this has been covered off about 10 times, do a search there was a couple of options.
hands and mums dont count!!!
Top
Posts: 6
Joined: Wed Jan 16, 2008 8:31 pm
Location: Wodonga, Victoria

Post by Hoggy »

Trusa wrote:Read the below thread. I'll see if I can dig up the pics.

http://www.outerlimits4x4.com/phpBB2/vi ... ht=caliper
New to the site and still learning how to drive it!! That thread was a good help however i checked it out and i'm going to have to grind into the holes where the pins float! Hence why i asked the question.

If you could dig up those photo's that would be awesome! Cheers
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest