Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Riveted Rangie Rims

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 148
Joined: Tue Dec 03, 2002 9:03 am
Location: Blue Mountains, Sydney

Riveted Rangie Rims

Post by stephen »

I picked up some old rangie rims from DAS on the weekend, I am a bit puzzled as to how they are built. Standard they should be about 16x6.5 but they measure 16x7.5ish and the centres are riveted in not welded. I assume they are not standard, are they supposed to be riveted? would they hold air without a tube? there are old michelins on the rims and they are balanced was there a time where rim modifying was done with rivits instead of welding :?: :? they are going on a camper trailer
Top
Posts: 26
Joined: Fri Nov 08, 2002 8:04 am
Contact:
Contact max200tdi

Post by max200tdi »

What are you measuring? Outer edge to outer edge?
Measure from safety lip to safety lip. That'll be the 6.5"

Regards
Max P
Top
Posts: 148
Joined: Tue Dec 03, 2002 9:03 am
Location: Blue Mountains, Sydney

Post by stephen »

Yeah that may be right then I am measuring edge to edge. So are the old rims rivited then? they are bloody rough looks like they have been grinded by hand dags hanging off and all.
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

yep old ones were rivitted.
at least the ones on my old RR were 76RR.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 130
Joined: Mon Jun 30, 2003 12:44 pm
Location: Melbourne

Rangie rims

Post by davejb »

I might be wrong but from memory the real early rangie rims did not have the safety bead rolled into the rim to keep the tyre on, and the centres were riveted to the rim not welded as you described

Dave
Top
Posts: 640
Joined: Sat Dec 07, 2002 4:04 pm
Location: Snake Valley VIC

Post by Aquarangie »

The old Rangie Rosstyle rims are only 6 inches wide, not 6.5 from what I have been told. They also have no safety bead as Dave said, so you should run tubes, although most people dont!!

I had about three sets of them laying around a few monts ago, sold them all off now (don't have any use for them).

Regards,

Trav
Land Rover- The Collingwood of 4WD's!!!!
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 5 guests