Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

BETTER BRAKES

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 142
Joined: Sat Jun 04, 2005 1:29 pm
Location: Townsville

BETTER BRAKES

Post by Newhouse »

Hello all!

I am chasing some better stopping power for the GQ. Does anybody know where I could get, say duel piston callipers or better?? And has anyone ever come across drilled rotors??

Thanks for the help.
97 4x4 hilux
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: BETTER BRAKES

Post by bogged »

Newhouse wrote:Hello all!

I am chasing some better stopping power for the GQ. Does anybody know where I could get, say duel piston callipers or better?? And has anyone ever come across drilled rotors??

Thanks for the help.
late model EFI GQ's have bigger discs and better calipers.

Go slotted, not drilled, they fill with mud and shizzle and wear ya pads much faster. BRaided lines also help.

there are full replacement brake systems available (discs/calipers etc), but the prices are probably more than your car.
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Re: BETTER BRAKES

Post by Hoonz »

bogged wrote:
Newhouse wrote:Hello all!

I am chasing some better stopping power for the GQ. Does anybody know where I could get, say duel piston callipers or better?? And has anyone ever come across drilled rotors??

Thanks for the help.
late model EFI GQ's have bigger discs and better calipers.

Go slotted, not drilled, they fill with mud and shizzle and wear ya pads much faster. BRaided lines also help.

there are full replacement brake systems available (discs/calipers etc), but the prices are probably more than your car.
care to share the info where to get the calipers?
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

I thought this post was about BETTER BRAKES in Blacktown. The cheapest place for you brake and clutch stuff.
I'm the sharpest tool in the shed!
Top
Posts: 3189
Joined: Thu Mar 04, 2004 1:11 pm
Location: Jimboomba

Post by BIG GQ »

Just get them from a 4.8ltr powered Patrol :?
Cheers
Linc

[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

v6hilux wrote:I thought this post was about BETTER BRAKES in Blacktown. The cheapest place for you brake and clutch stuff.
shut up dick head
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 282
Joined: Sun Dec 24, 2006 5:10 am
Location: Lawnton,Brisbane.

Post by simcoz »

BIG GQ wrote:Just get them from a 4.8ltr powered Patrol :?

Pretty shaw you can only run 16' wheels or bigger on the 4.8 brakes.
Not 100% though.
Corey & Simone
Team Cozamatic Racing
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

simcoz wrote:
BIG GQ wrote:Just get them from a 4.8ltr powered Patrol :?

Pretty shaw you can only run 16' wheels or bigger on the 4.8 brakes.
Not 100% though.

do GU 4.8 brakes bolt up to GQ diffs?
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: BETTER BRAKES

Post by bogged »

Hoonz wrote:care to share the info where to get the calipers?
the GQ ones? Wreckers is hte best place
occasionally there are the complete brake upgrade kits on ebay for around $4000, and I think theres a 4wd place in Vic that has a complete 4 disc 4 caliper upgrade but its well over $5000...
Top
Posts: 325
Joined: Sat Aug 07, 2004 7:19 pm
Location: Newcastle

Post by Sandy Rut »

Hoonz wrote:do GU 4.8 brakes bolt up to GQ diffs?
I havent done it but 99.9% sure they would bolt up. Knuckles are the same in the front, and woulndt think Nissan would have a different flange on the back diffs just for 1 model.

Dont 4.8s have ABS though? would this cause any probs running calipers in a non ABS truck?

Has anyone actually done it?
[quote="Yom"]
Some people believe GQ's are overhyped shitboxes.[/quote]
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

Sandy Rut wrote:


Dont 4.8s have ABS though? would this cause any probs running calipers in a non ABS truck?

Has anyone actually done it?
It could be done, just leave the ABS controller out, Make sure your master cylinder & caliper hydraulic ratios are correct & you should be away.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

ABS sensors are on the CV/axle/bearing/hub somewhere. Not on the brake calipers themselves, so the donor vehicle having ABS will make no difference whatsoever. :)
Top
Posts: 224
Joined: Tue Aug 12, 2003 6:33 pm
Location: Sunshine Coast

TDK engineering

Post by heathgu »

TDK engineer do a 6 spot caliper fronts and 4 spot caliper rears to suit a GU not sure on GQ you could call them find out.

CNC machined out of 6061 aluminium direct bolt up fit. The caliper is manufactured to fit inside 15" wheels.

The piston sizes are the correct ratio for the original master cylinder.

Pads run from $120 to $600 a pair.

TDK
Heidelberg Heights
(03) 94599175

Also know alcon are doing brake upgrades, V8 supercar spec gear but you got to run min 17" rims. And cost is ++++ :bad-words:

Regards Heath
Top
Posts: 215
Joined: Mon Aug 09, 2004 9:32 pm
Location: Ipswich

Post by 92mav »

i have a gu front diff assembly out of a gu ute and the calipers will not fit on my gq
GQ TD42, 4" lift, 2" bodylift, 4.6 s, detroit lockers, 35,s t3/t4 plus a turbo,
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

92mav wrote:i have a gu front diff assembly out of a gu ute and the calipers will not fit on my gq
BINGO!
thanks heaps 92mav
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 3189
Joined: Thu Mar 04, 2004 1:11 pm
Location: Jimboomba

Post by BIG GQ »

Luke I bought a GU front diff for my ute and bolted my GQ brakes straight on without ANY mods mate so I don't see a drama.

I am unsure what model GU housing it was (but I can't imagine Nissan changing it for one model) and the GQ brakes were from an 89 TB42 wagon :?
Cheers
Linc

[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

I have heared of early 2.8 deisel gu running small brakes same as gq, I cannont conferm though
Top
Posts: 142
Joined: Sat Jun 04, 2005 1:29 pm
Location: Townsville

Re: TDK engineering

Post by Newhouse »

heathgu wrote:TDK engineer do a 6 spot caliper fronts and 4 spot caliper rears to suit a GU not sure on GQ you could call them find out.

CNC machined out of 6061 aluminium direct bolt up fit. The caliper is manufactured to fit inside 15" wheels.

The piston sizes are the correct ratio for the original master cylinder.

Pads run from $120 to $600 a pair.

TDK
Heidelberg Heights
(03) 94599175

Also know alcon are doing brake upgrades, V8 supercar spec gear but you got to run min 17" rims. And cost is ++++ :bad-words:

Regards Heath
Thanks heaps Heath, will call them tomorrow and will let everyone know the prices. That set up sounds the goods.
97 4x4 hilux
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest