Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ignition Key is hard to turn..

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1
Joined: Mon Jan 14, 2008 6:42 pm
Location: USA

ignition Key is hard to turn..

Post by toychrisus »

Hello members,

My Toyota 4-runner ignition key is hard to turn, its been lubricated but it does not last, any ideas?


Chris...
Top
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

Whats it been lubricated with? I hope oil wasnt used. Try powdered graphite.
Mud makes excellent toothpaste.
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

If you've got another key other than one you usually use then try it and see if it feels any different, It may be that the key is worn.
It could also be the ignition switch itself, not the key barrell. When you say hard to turn do you mean you require extra force to rotate the key through any position or is it stiff at one point but once past that it is easier to rotate?
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 198
Joined: Fri Sep 21, 2007 8:17 am
Location: melbourne

Post by icrawl »

give it a spray with silicon spray or wd40
Top
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Contact:
Contact bj42turbo

Post by bj42turbo »

When you say "hard to turn" do you have to jiggle it from the off/locked position or the actual turning of the key.


BJ
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

icrawl wrote:give it a spray with silicon spray or wd40
Don't give it a spray with WD40 or silicone. Wet lubricants attract dirt and grit and will cause it to become worse than it was. Wet lubricants also tend to 'wash' the barrell. As the barrell wears very fine particals of the cast alloy the housing is made form actually acts as a lubricant, similar to graphite powder. When this is washed away your barrell wears faster.
Dan
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Post by Mark2 »

Ruffy wrote:
icrawl wrote:give it a spray with silicon spray or wd40
Don't give it a spray with WD40 or silicone. Wet lubricants attract dirt and grit and will cause it to become worse than it was. Wet lubricants also tend to 'wash' the barrell. As the barrell wears very fine particals of the cast alloy the housing is made form actually acts as a lubricant, similar to graphite powder. When this is washed away your barrell wears faster.
Dan
I'm not convinced that silicon is a 'wet' lubricant - I find that not much sticks to it. Its great stuff for all sorts of things.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 48 guests