anyone know where i can tap my boost guage line into? cant seem to see anywhere i can put a T-piece in.
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU II 3ltr boost guage
Mine is mounted on the pipe coming out of the intercooler. Easy to do. Go to hydrolic/hose place, get 1/8th stainless boss and matching brass barb. REmove intercooler pipe, drill hole and weld in boss. Screw in barb. Refit pipe. Press on boost guage pipe (or use a short length of silicone hose to hold. Then run line thru firewall and bobs ya uncle.
Hope this helps Matt.
Hope this helps Matt.
Who is online
Users browsing this forum: No registered users and 2 guests